Drip irrigation set 35 m² Plug&Rain various designs

High-quality drip pipe assembly set for approx. 35 m² bed or 50 m hedge - in uncompromising Plug&Rain Quality

Version for 24 mm, 25 mm or 32 mm PE pipes

Your flower beds, bushes or hedges suffer from heat and dryness during the summer months? You want a particularly water-efficient irrigation system that can also supply water to narrow areas in your garden or plants in difficult terrain, wind-exposed areas and steep slopes? Here we recommend our drip tube through which the water is slowly and selectively released into the root zone. In this way, evaporation losses are minimized and the plants are always watered with pinpoint accuracy.

To irrigate a bed area, drip pipes are laid evenly on the ground with a distance of approx. 35 cm, the individual strands are connected with T-pieces and fixed to the ground with soil hooks. In the case of hedges, a drip pipe is laid on both sides and the two strands are also connected. Individually standing bushes can be enclosed with a ring of drip pipe. A connection with a suitable pressure reducer is used to supply the drip pipe, the connection is connected to your 24mm, 25mm or 32mm PE supply line with a clamp connector or Blu-Lock connector.

The Plug&Rain® drip pipe assembly unit includes all necessary parts to irrigate an area of about 35 m² with drip pipe in above-ground installation. The premium drip pipe from market leader Netafim offers maximum resistance to clogging, operational reliability and service life with chemical-free root wax protection, anti-siphon function, filter built into the dripper and water extraction from the middle section of the drip pipe. The connection set with shut-off valve and pressure reducer with integrated filter unit is intended for end connection to your supply line. The flexible Blu-Lock pipe makes the connection part particularly easy and precise to install.

Technical data:
- Drip tube: outer diameter 16.6 mm, wall thickness 1.2 mm, 30 cm drip distance and 2.3 liters/h per drip point, operating pressure 0.5 to 4.0 bar, recommended filtration 120 µm.