Whether rainwater cistern, drinking water network or your own well - we have powerful and durable pumps to supply your Plug&Rain® irrigation system.
Rainwater, which is temporarily stored in an appropriately sized cistern, is ideally suited for garden irrigation. For this purpose, the Plug&Rain® cistern pump and a filter unit are installed in the supply line. With a filter, you avoid clogging nozzles and drip pipes, thus extending the service life of your system.
For systems supplied with drinking water, we recommend using our Plug&Rain® drinking water separation unit. This prevents water from the garden from getting back into the drinking water network.
If a steady flow of groundwater is guaranteed even in dry summers, well water for garden irrigation is a cost-effective solution. For this purpose, use a Plug&Rain® well pump together with a filter unit. With a filter, you also prevent nozzles and drip pipes from becoming clogged. This will extend the service life of your system.
With the Plug&Rain® tap connector, you can easily connect your garden irrigation system to the existing water supply.
With the EXPERT connection, a 2-way manifold with ¾" fitting is screwed onto the existing tap. This allows you to continue to easily withdraw water from your tap.
With a flexible stainless steel pipe the water is led from the manifold down to the ground in an optically appealing way. Here, the transition to the PE pipe you selected during planning (25 mm or 3/4" or 32 mm or 1", depending on the available water quantity and length of the pipe) is made using a high-quality pressure fitting that is permanently pressure-resistant up to 16 bar.