Well pump set for irrigation systems with AMEIRA 4" stainless steel submersible pump, Plug&Rain® EXPERT
For all wells up to approx. 10 m depth (Ø min. 125 mm)
Do you want to drill a well for your irrigation? That's a good idea, because this will ensure you a permanent and particularly cheap source of water!
Here you will also find the right pump for it!
Our well pump set Plug&Rain® EXPERT includes an AMEIRA S4 3/9 well pump, which delivers an optimal performance for irrigation systems with wells with a groundwater level of up to - 10 m with about 1.8 m³/h at a dynamic pressure of 3.5 bar.
With this output, you can perfectly dimension the irrigation circuits and, for example, irrigate a lawn area of about 180 m² or about 70 m² of flower beds in one irrigation circuit with the MP Rotator.
The new Plug&Rain® Expert well pump set includes the AMEIRA S4 3/9 multistage stainless steel well pump with two-pole asynchronous motor and Presscontrol D control unit.
Plug&Rain® EXPERT well water pump set:
- AMEIRA S4 3/9 stainless steel well pump
- 4" pump for use in 4" pipe (DN100)
- Certified for drinking water applications
- Connecting parts for 25 mm and 32 mm PE pipes
- 25 m PE riser pipe (32 mm) with all necessary connection parts
- Rope and snap hook for lowering / adjusting the pump in the well shaft
Technical data:
- Operating voltage 230 V / 50 Hz
- Power 0,55 kW / 0,75 PS
- max. delivery head: 50 m
- max. flow rate: 4,2 m³/h
- max. immersion depth: 250 m
- delivery rate at 4.4 bar: approx. 1.8 m³/h
- Cable length: 15 m
- Separate automatic pump control PRESSCONTROL D with pressure and flow sensor, switch-on pressure 1.5 bar
- Integrated check valve
- Integrated dry run protection
- max. sand load in water: 150 g / m³
Dimensions: approx. 10 x 10 x 56 cm
Weight: 16,4 kg
More information about the pump here.
- Shipping weight: 24,00 kg
- Item weight: 24,00 kg