Water tap timer (mechanical) and supply line for Plug&Rain® micro irrigation^®mikro

Connection set ECO for micro-irrigation in the Plug&Rain^®mikro

Would you like a simple connection set for micro-irrigation? One that reliably turns off the water at the end of the irrigation cycle?

The mechanical timer from Orbit can be set to an irrigation time of up to 120 minutes as easily as an egg timer. This also makes it easier for your neighbor to apply the correct amount of water to your beds while you are on vacation.

You can simply screw the timer onto your 3/4" garden tap, before the transition to the 16 mm (1/2") supply line, the operating pressure is reduced to an optimum 1.8 bar via an easily screw-on pressure reducer.

The 16 mm PE supply line can simply be laid up to your plants and covered with soil. Corners or branches can be inserted using the enclosed connectors.

The water is transferred to the selected micro-irrigation elements close to the plants.

Find the right micro-irrigation set for balcony and patio plants or for your garden planting and the beds.

Finished! Turn on the tap and the micro irrigation is running!

Technical features:

The set includes a connection with mechanical tap timer, pressure reduction (1.8 bar), 25 m PE supply line (Ø 16 mm) and a connector set to lay the supply line according to your needs. If required, the supply line can be fixed to the ground in the areas above ground using the enclosed ground hooks.

Contents:

Attention:

This set is only intended for outdoor use. During the frost period, please remove the water from your irrigation system by blowing it out with compressed air or store the parts of the irrigation system protected from frost during the winter.