Drip irrigation for raised beds Plug&Rain^®mikro

The professional irrigation system for raised beds in the Plug&Rain^®mikro

Are you looking for a really good irrigation solution for your raised bed? A system that irrigates evenly, is unobtrusive, can be laid flexibly around the crops and does not wet sensitive crops such as tomatoes from above? Take a look at our micro drip tube system for raised beds!

Raised beds are great fun and give gardeners a rich harvest of aromatic vegetables. The raised position of the soil volume leads to higher conversion in the soil and accelerated plant growth due to its higher temperature, but also to higher water requirements.

Since most vegetables do not appreciate overhead irrigation, for example with a watering spray, but still require moist soil for their growth, it is advantageous to install irrigation close to the soil. Our irrigation system with the particularly slim and flexible 6 mm micro drip tube is perfect for this. It provides unbeatably direct, close-to-ground irrigation, which is also very uniform thanks to the small distance of 15 cm between the individual drippers.

The set includes micro valves for easy shut-off of individual irrigation lines - for example after harvesting a crop. During crop care, the drip tube can simply be removed from the bed and then laid out again between the rows.

The raised bed drip irrigation set

The set contains 15 m of drip pipe (&p; 6 mm) and all the necessary parts to connect the drip pipe to the 16 mm (1/2") PE supply line using tool-free connectors. Also included are nail clamps for fixing the supply pipe to the edge of the raised bed and ground spikes for fixing the micro drip pipe in the raised bed.

Water consumption raised bed set: Total: 300 L/h; per meter 20 L/h.

Here you can find our supply line sets, also with water tap connection and control.

Contents:

• 15 m micro drip pipe  (Ø 6 mm, dripper: 3 L/h, dripper spacing 15 cm)
• 25 pcs. Micro ground spike for fixing the micro drip tube
• 5 pcs. Connection to 16 mm (1/2“) supply line, can be used without tools
• Micro connector (3/16"):
  • 20 end plugs
  • 10 T-pieces
  • 10 elbows
  • 5 micro valves
• 10 nail clamps for fastening the 16 mm PE supply line to the raised bed
.

Attention:

Operate a maximum of 5 m of micro drip pipe on a 3/16" connection!

This set is only intended for outdoor use. Please remove the water from your irrigation system during the frost period by draining it or blowing it out with compressed air or store the parts of the irrigation system protected from frost during the winter.