Control (1 circuit) and supply line for Plug&Rain® micro micro-irrigation

Connection set Expert for micro-irrigation in the Plug&Rain^® micro system

Do you want your micro-irrigation system to always know what to do? Do you want your garden to be watered precisely even when you are not there?

The Expert connection set in the Plug&Rain Micro system is just what you need. The Claber 1-circuit controller can be precisely programmed using two push buttons and, if desired, can even be controlled using a separately available rain sensor or wireless rain sensor (requires receiver).

The control unit is simply screwed onto your 3/4“ garden tap. Before the transition to the 16 mm (1/2”) supply line, a screw-on pressure reducer reduces the water pressure to an optimal 1.8 bar.

Simply lay the 16 mm PE supply line to your plants and cover it with a little soil if desired. Corners or branches can be fitted using the connectors provided.

The water is transferred to the selected micro-irrigation elements in the immediate vicinity of the plants. This minimizes pressure losses in the pipes.

Find the right micro-irrigation set for balcony and patio plants or for your garden planting and flower beds.

A great thing that not only your plants will be happy about!

Technical details:

The set includes an irrigation computer for connection to a 3/4" water tap with a control circuit, pressure reduction (1.8 bar), transition to 16 mm (1/2") PE pipe, 25 m PE supply line (Ø 16 mm), and a connector set to lay the supply line according to your needs. The supply line can be fixed to the ground in above-ground areas using the ground hooks provided.

Contents:

• Claber Tempo Select (1 control circuit)
• Pressure reducer (1.8 bar)
• Adapter for 16 mm PE pipe with union nut
• 25 m PE supply pipe (Ø 16 mm (1/2"), pressure resistance PN4, black)
• 10 ground spikes for securing the supply pipe
• Connectors (16 mm, with union nut):
• 3 end plugs
• 2 T-pieces
• 2 elbows
• 2 straight connectors
• 1 roll of Teflon tape

Please note:

This set is only intended for outdoor use. During the frost period, please remove the water from your irrigation system by blowing it out with compressed air or store the parts of the irrigation system in a frost-free place over the winter.