Pressure reducer to 1.8 bar (3/4" AG x 3/4" IG)
Pressure reducer for mounting to taps, for reducing line pressure to 1.8 bar.

11,90 €
incl. 19% VAT , plus shipping costs
Available immediately
Deliverydate: 28.05.2024 - 31.05.2024
Description

Pressure reducer to 1.8 bar (3/4" AG x 3/4" IG) - Pressure reducer for your irrigation system


With this pressure reducer you can connect your micro irrigation systems to the water tap. The water pressure from the line is reduced to 1.8 bar by this component. This provides the optimum line pressure for microirrigation operation.

The pressure load is reduced by the pressure reducer. This protects the connections, lines and components of the irrigation system. Lines and connections are protected from pressure peaks and it is ensured that the system is not damaged.


The pressure reducer is preset to 1.8 bar and is intended exclusively for outdoor use. Especially in micro irrigation and drip tubes, a maximum operating pressure of 1.8 bar is recommended to protect the various components and parts. This pressure reducer is suitable for this purpose. This protects the filigree parts and system components from premature wear, pressure damage and pressure peaks. The pressure reducer from TECO is of very high quality and suitable for many years of outdoor use due to UV stabilization of the plastic.

Please note the flow direction, this is marked with an arrow on the housing. Your input side has an internal thread, the output side has an external thread.


The component must be drained before the first frost. Alternatively, the pressure reducer can be stored frost-free.


This pressure reducer is ideal for use in landscaping, greenhouses and vegetable gardens.


Dimensions

  • Height: 75 mm
  • Width: 32 mm
  • Depth: 32 mm


Specifications

  • Connections: 1 x 3/4" female thread (inlet); 1 x 3/4" male thread
  • Pressure reduction to 1.8 bar


  • Shipping weight: 0,04 kg
  • Item weight: 0,04 kg
  • seo_name:
Reviews (2)

5/5
(2)

4 Stars
3 Stars
2 Stars
1 Star

Share your experiences with other customers!

Funktioniert wunderbar
5 from 5

Macht was er soll. Druckreduzierung ist ein Muss, sonst fliegen die Endstopfen oder Verbinder raus. Am Durchfluss änder sich nach meiner Erfahrung nichts, ich habe hinter diesem Druckminderer bis jetzt 12 Sprüher, Blubbas und Tropfer in 3 Stufen angeschlossen ohne eine Minderung der Wassermenge zu bemerken.

Das Gerät arbeitet so gut wie lautlos, ein Konkurrenzprodukt aus dem Baumarkt erzeugt deutlich wahrnehmbare Ströumgsgeräusche.

Deshalb hier eine klare Empfehlung.

Uwe B., 10.08.2020
Einfach zu montieren, funktioniert.
5 from 5

Preiswertes Teil, welches seinen Zweck wunderbar erfüllt. Montage ist total einfach.
Ich habe zwei von den Teilen, beide vor je ca. 100m Tropfrohr. Funktioniert perfekt.

Alexander C., 26.04.2021