Plug&Rain PREMIUM

Whether rainwater cistern, drinking water network or own well - we have the powerful and durable pumps to supply your Plug&Rain® irrigation system.

Extra durable and particularly quiet premium stainless steel pump:

• Separate control unit with pressure and flow rate-dependent regulation of the pump
• Vertical or horizontal operation possible, immersion depth up to 20 m
• Delivers approx. 3.5 m³/h at 3.5 bar operating pressure
• Complete with 5 m 1” Quattroflex hose and connections for transition to 25 mm or 32 mm PE pipe
• Floating water withdrawal
• Metal connection fittings
• Quality hose for flexible connection
• Stainless steel pump housing
• Separate pump control with non-return valve
• Pre-assembled set

Good to know: 

All our pumps deliver an optimum flow rate of at least 1.8 m³/h at 3.5 bar for the operation of irrigation systems. Frequent switching on reduces the service life of your water pump. An expansion tank in the pressure line stabilizes the pressure and prevents the pump from switching on too frequently.

The quick and secure connection from the tap to the PE pipe: the Plug&Rain® tap connection connects the garden tap to the permanent pressure pipe laid underground and is equipped with an additional outlet for manual water withdrawal.

Pre-assembled brass manifold with two ball valves:

• Brass connection piece with second outlet for manual water withdrawal at the garden tap
• Flexible stainless steel pipe with adapted cross-section for 25 mm and 32 mm variants
• High pressure resistance for secure installation: high-quality clamp connector for connecting PE pipe
• Suitable for 1“ (ø 33 mm) and ¾” (ø 26 mm) taps thanks to brass adapter
• Material in the above-ground area: brass / stainless steel
• Two separate stopcocks

Flexible: If a permanent connection of the irrigation system is not an option, the water supply can be implemented with this temporary connection. Large internal diameters allow high flow rates.

High-quality mini shaft with cover to protect against soiling for installation flush with the ground

• With pre-assembled, high-quality clamp connector for installation flush with the floor
• 2m ¾” (19 mm) quality hose with diagonal reinforcement and burst pressure of 30 bar
• Attached to this are two high-quality quick-release hose sections with enlarged internal cross-sections for a larger flow rate
• Rain Bird water socket plug with 90° angle and a quick coupling for increased flow for connecting the hose
• A water socket with quick coupling and metal ball valve with ¾” (ø 26 mm) connection
• Suitable for 1“ and ¾” taps thanks to adapter in the hose connection
• Ball valve
• Connection in the mini shaft
• Pre-assembled unit

Ensures the safety, reliability and longevity of your system: The main valve only opens the water inlet during the set irrigation times. The filter safely removes particles such as sand or organic material so that the nozzles and drip outlets do not become blocked and continue to function.

The underfloor version is available assembled in a handmade black premium box:

• large-volume filter unit from Rain Bird with 130 micron stainless steel screen filter (up to 20 m³/h)
• Hunter PGV main valve (24 V AC) with flow regulation
• Compressed air drain with valve and compressed air coupling for convenient winterization
• 1” (Ø 33 mm) brass ball valve as manual shut-off valve
• High-quality compression fittings for PE pipe
• Noble 1” (ø 33 mm) brass screw connector
• Waterproof electrical connection set
• High-end solenoid valve Hunter IBV 101 made of brass
• Compressed air access
• Electrical connection set
• Brass distribution pipe

The pressure-resistant pipe carries the water from the water source to the valve distribution and is under permanent pressure. Before the first solenoid valve, the pressure resistance of the supply line should be at least PN10 (corresponds to a pressure resistance of 10 bar at 20°C). Our compression fittings are designed for permanent pressure up to 16 bar. As a rule, pipes with an outer diameter of 25 mm (¾“ PE pipe) and 32 mm (1” PE pipe) are used. When purchasing, pay attention to the following parameters in addition to the required length of the pipe material

• Diameter: 25 mm or 32 mm
• Pressure resistance: min. PN10, better PN16
• UV resistance: Only use black PE pipe for above-ground installation

To connect your Plug&Rain® installation components to each other, you will need sufficient PE pipe in the correct dimensions.

Important: After the first valve, the pressure is lower due to the consumer and is only present temporarily. As a rule, more flexible PE pipe (PN6) can then be used.

When purchasing, pay attention to the following parameters in addition to the required length of the pipe material:

• Diameter: 24 mm Blu-Lock, 25 mm, 32 mm
• Pressure resistance: PN6 to PN16, i.e. pressure-resistant from 6 bar to 16 bar depending on the model
• UV resistance: Only use black PE pipe for above-ground installation

Modern technology for your garden: The smart control unit can be integrated into the Wi-Fi via touch screen and then operated via the Hydrawise app. This gives you access to your irrigation system at any time - whether via smartphone, tablet or web browser. Weather forecasts from the internet optimize the watering times on a daily basis and you are notified immediately in the event of a fault.

• Individual control of eight watering circuits, modularly expandable up to 36 stations
• Daily adjustment of the watering program
• Integration of weather data (temperature, humidity, wind speed, precipitation) and professional weather forecasts
• Can be controlled worldwide via smartphone (Hydrawise app) or web browser
• Milliamp sensors monitor the function of cabling and solenoid valves
• Rain-Clik wireless rain sensor for recording local precipitation
• Optional integration of the Hunter HC flow meter - for documenting water consumption and monitoring the function of pipes and sprinklers
• Circuit board equipped with particularly high-quality electronic components
• Enthusiast Plan (1-year subscription): Evaluation of several weather stations for hyperlocal weather, alarms via SMS, five user accounts
• Internet connection via WLAN
• Interruption in case of rain
• Predictive adjustment of running times
• Wireless sensor in the set
• Generous space for cabling

The flow meter precisely documents the water consumption and monitors the function of the piping and the sprinklers. Depending on the installation situation, the set is available for wall mounting or as an underfloor version.

Control set with wired sensors:

• Individual control of eight irrigation circuits, modularly expandable up to 36 stations
• Precise demand estimation with daily adjustment of the irrigation volume using the Solar Sync weather sensor
• Numerous additional functions (seepage phases, diagnostic program for performance errors, etc.)
• Significantly extended performance spectrum
• Extension to smart operation (Centralus) possible
• Option for seasonal adjustment
• User-friendly functions
• Robust and durable design
• Interruption during rain
• Weather-dependent adjustment of running times
• With Centralus: use of weather data
• With Centralus: Web-based control & monitoring

Reliable, durable and suitable for high flow rates: Whether motorized in an underfloor box or assembled for wall mounting, our valve distributors meet the expectations placed on a professional irrigation solution.

• High-end IBV-101 valves from Hunter (24 V AC) made of brass with flow regulation for precise regulation of the water supply, permanently pressure-resistant up to 15 bar and particularly safe thanks to the double EPDM diaphragm
• Sturdy brass pipe elements with 1” external thread (ø 33 mm) screw connection (Made in Italy)
• Central compressed air connection for professional and convenient winter draining
• Inlet with particularly pressure-resistant Unidelta clamp connector (25 or 32 mm)
• Outlets with plug connector (Blu-Lock in 24 mm) or high-quality Unidelta clamp connector (25 or 32 mm)
• Handmade black box from German production
• Angle bracket for cascading the water outlets
• Distribution system with large diameter
• Electrical connection set
• Brass manifold
• Pre-assembled unit

The wall-mounted distributors are all supplied in individual parts and can be assembled in a few simple steps.

• High-end IBV-101 valves from Hunter (24 V AC) made of brass with flow regulation for precise regulation of the water supply, pressure-resistant up to 15 bar and particularly safe thanks to double EPDM diaphragm
• Sturdy brass pipe elements with 1” (ø 33 mm) screw connection
• Compressed air connection for convenient winter draining of the entire irrigation system
• Inlet with high-quality Unidelta clamp connector
• Outlets with plug connector (Blu-Lock in 24 mm) or high-quality Unidelta clamp connector
• Large 1” (ø 33 mm) brass ball valve for manual shut-off of the entire system
• Pressure gauge for monitoring the operating pressure
• Complete fixing set for wall mounting
• Waterproof electrical connectors and electrical distribution box
• Optimum weather protection available
• Wall mounting set
• Electrical connection set
• Brass manifold

As a multi-rotating emitter, the MP Rotator irrigates your lawn particularly evenly, is less susceptible to crosswinds and can significantly reduce both installation costs and water consumption. This makes it our most popular sprinkler system.

Rotating jets instead of spray mist for the most even precipitation, the high-tech solution with 24 miniature channels:

• sprinkler housing that regulates the pressure to 2.8 bar with a particularly robust stainless steel riser
• Complete connection system with flexible 15 mm BL-FLEX pipe, can be shortened
• T-piece for integrating the pop-up sprinkler into the main line
• Connector included for customizing the flexible pipe
• Integrated outlet protection valve
• Pre-assembled unit

Impressive throw distances for large lawns: Hunter's powerful geared sprinklers are particularly suitable for watering larger rectangular lawns.

• Hunter I-20 SS geared sprinkler with particularly robust stainless steel riser
• Nozzle set with 8 standard nozzles, 4 flat jet nozzles and 6 short radius nozzles
• Blu-Lock connector for individual adjustment of the flexible pipe also included
• Complete connection system with flexible 15 mm BL-Flex pipe, can be shortened
• Integrated outlet protection valve
• FloStop
• Pre-assembled unit

Our professionally assembled complete installation unit is ideal for small-scale irrigation solutions. The components are optimized for Hunter spray nozzles and suitable for targeted spray width reduction of MP Rotator nozzles.

Small throw distances for narrow and angled areas:

• Housing pressure regulated to 2.1 bar with particularly stable stainless steel riser
• Complete connection system with flexible BL-FLEX pipe, can be shortened
• T-piece for integrating the pop-up sprinkler into the main line
• Blu-Lock connector included for individual adjustment of the flexible pipe
• Integrated outlet protection valve
• Pre-assembled unit

Restrained and precise watering for healthy plants and long-lasting flowers: The best way to water under perennials, shrubs or hedges is to install a drip tube close to the roots. This ensures a targeted and water-efficient supply and disappears visually under the vegetation. One installation set supplies a bed area of 35 m² or 50 meters of hedge.

100 m high-end drip pipe from world market leader Netafim with pressure compensation, suitable for above-ground and underground* installation (* with Plug&Rain® extension set for underground installation):

• Connection set with high-quality clamp connector, swing joint, pressure reducer, stopcock and 17 mm lock-type drip pipe connection
• Earth hooks with improved holding effect (100 pieces)
• XFF T-pieces, 17 mm (10 pieces)
• XFF straight connector, 17 mm (5 pieces)
• XFF 90° angle connector, 17 mm (10 pieces)
• Lock-type end plugs, 17 mm (10 pieces)
• XFF installation tool for efficient and convenient work
• Connection with pressure reduction
• Protection against root ingrowth
• Pre-assembled connection unit
• Filtration of the water in the connection unit