Hunter Bluetooth control (2 circuits) and supply line for Plug&Rain®micro irrigation^®micro

The 2-zone connection set with Bluetooth control in the Plug&Rain^®mikro

system

Would you like two separately controllable zones and a control system that can be conveniently adjusted via your smartphone?

The two-zone version of the Hunter BTT controller offers you extremely simple irrigation programming that can be adapted precisely to your needs. Download the Hunter BTT app and set the start time and duration of irrigation, free from fixed programs. You can even program watering and soaking phases to the second, which is otherwise only possible with very complex controllers. Two AA batteries provide the operating voltage for the controller, so you are independent of a mains voltage supply.

The installation is very simple: The control unit is simply attached to your 3/4" or 1" garden tap, before the transition to the 16 mm (1/2") supply line, a screw-on pressure reducer reduces the water pressure to 1.8 bar, the optimum pressure for the drip tube and micro irrigation. The connection to the 16 mm PE supply line is established via a transition piece.

Simply lay the supply line up to your plants and cover it with some soil if desired. Corners or junctions can be filled in using the enclosed connectors.

The water is transferred to the selected micro-irrigation elements in the immediate vicinity of the plants. Depending on your garden connection, up to 700 liters of water per hour can be delivered to the micro-irrigation elements per control circuit.

A really fine control and connection set!

Find the right micro-irrigation set for balcony and patio plants or for your Garden planting and the beds.

Technical features:

The set includes a Hunter Bluetooth irrigation computer with two control circuits for connection to a 3/4" or 1" (26 mm / 33 mm) water tap, two pressure reducers (1.8 bar) for screwing on (outlet side), two ¨ to 16 mm (1/2") PE pipe, 25 m PE supply line (Ø 16 mm) and a connector set to lay the supply line according to your requirements. If required, the supply line can be fixed to the ground in the areas above ground using the enclosed ground hooks.

Contents:

Hunter BTT 201 (2 control circuits)

2 x pressure reducer (1.8 bar)2 x transition piece to 16 mm PE pipe with union fitting

25 m PE supply line  (Ø 16 mm (1/2"), pressure resistance PN4, black)

10 ground spikes for fixing the supply pipe

Connector (16 mm, with union fitting):

• 4 end plugs
• 2 T-pieces
• 4 elbows
• 2 straight connectors

1 roll of Teflon tape

Attention:

This set is only intended for outdoor use. Please remove the water from your irrigation system during the frost period by blowing it out with compressed air or store the parts of the irrigation system protected from frost during the winter.