Hunter Bluetooth control (1 circuit) and supply cable for Plug&Rain®micro irrigation^®micro

The connection set with Bluetooth control in the Plug&Rain^®mikro

system

You want to have your irrigation perfectly under control and prefer programming the controller via smartphone and Bluetooth?

The Hunter BTT controller offers you particularly simple and perfectly customizable irrigation programming. With the Hunter BTT app, you can set the start time and duration of irrigation clearly, precisely and free of fixed programs. Even watering and soaking phases accurate to the second are possible here, which is otherwise only possible with very complex controllers. Two AA batteries provide the operating voltage for the controller and make it independent of a mains voltage supply.

The control unit is simply screwed onto your 3/4" or 1" garden tap, before the transition to the 16 mm (1/2") supply line, a screw-on pressure reducer reduces the water pressure to an optimum 1.8 bar.

Simply lay the 16 mm PE supply line up to your plants and cover it with a little soil if desired. Corners or branches can be routed using the enclosed connectors.

The water is transferred to the selected micro-irrigation elements in the immediate vicinity of the plants. This minimizes pressure losses in the pipes.

A fine thing that not only your plants will be happy about!

Technical features:

The set includes a Hunter BTT irrigation computer for connection to a 3/4" or 1" (26 mm / 33 mm) water tap with a control circuit, pressure reduction (1.8 bar), ¨ transition to 16 mm (1/2") PE pipe, 25 m PE supply line (Ø 16 mm) and a connector set to lay the supply line according to your requirements. If required, the supply line can be fixed to the ground in the areas above ground using the enclosed ground hooks.

Contents:

Hunter BTT 101 (1 control circuit)

Pressure reduction (1.8 bar)

Transition piece to 16 mm PE pipe with compression fitting

25 m PE supply pipe  (Ø 16 mm (1/2"), pressure resistance PN4, black)

10 ground spikes for fixing the supply pipe

Connector (16 mm, with compression fitting):

3 end plugs

2 T-pieces

2 elbows

2 straight connectors

1 roll of Teflon tape

Attention:

This set is only intended for outdoor use. Please remove the water from your irrigation system during the frost period by blowing it out with compressed air or store the parts of the irrigation system protected from frost during the winter.