Irrigation system for planters Plug&Rain^®mikro

8-jet shrubber for up to 5 planters in the Plug&Rain^®mikro

A few beautiful planters and your patio will become your own personal oasis of well-being! So that the orange, oleander or olive tree in its planter does not suffer from drought, there is nowadays the right irrigation system.

Our irrigation set for planters with the shrubbler reliably supplies your plants with cool water. Eight soft jets of water from the shrubblers (ANTELCO, Australia) irrigate the planter close to the ground with low erosion and can be perfectly adjusted in terms of irrigation radius and water volume. The shrubbler can simply be inserted into the substrate of the planter and supplied with water via the particularly flexible micro hose.

One shrubbler is usually sufficient for a planter with a diameter of 20 to 50 cm; the radius on which the drops fall can be set between approx. 5 and 25 cm. Depending on the setting, the planter is irrigated with 25 to 50 liters of water per hour.

The shrubbler in Australian quality - sun-tested and heat-resistant!

The planter box set:

The set contains 5 "shrubbler " bubbler spouts " as well as all the necessary parts to connect them to the 16 mm (1/2") PE supply line via 3/16" micro tubing.

Water consumption planter set: Total: 125 - 250 L/h; 25 - 50 L/h per piece.

To connect the potted plant watering system to your water supply, you can find our supply line sets here, also with tap controls such as the Hunter BTT.

Contents:

• 5 "Shrubbler" 360° bubbler sprays (ANTELCO)
• 10 m flexible micro hose (3/16")
• 5 pcs. Connection to 16 mm (1/2") supply line, can be used without tools
• Micro connector (3/16"): 10 end plugs, 2 T-pieces.

Attention:
This set is only intended for outdoor use. Please remove the water from your irrigation system during the frost period by blowing it out with compressed air or store the parts of the irrigation system protected from frost during the winter.