T-piece for 2 valves 1" AG x 3 x 1" IG. Dura MSTE-3FXM
Screw connections DURA made of PVC with union nut and integrated O-ring. T-piece 1" male thread with 3 x screw connection 1" female thread. For 2 valves.

26,35 €
incl. 19% VAT , plus shipping costs
Available immediately
Deliverydate: 12.12.2024 - 20.12.2024 (DE - int. shipments may differ)
Description

DURA T-piece 1" male thread - 3 x 1" female thread - Mounting connections for valve distribution with two valves

  • T-piece DURA 3 x 1" IT - 1 x 1" ET
  • manifold for 2 valves
  • 1" male thread (33,25 mm) with 3 x screw connection ø 1" female thread (30,29 mm)
  • made of highly stable PVC
  • with integrated O-ring in the female threaded connection
  • Pressure resistant up to 10 bar.
  • Color: PVC gray
  • L/W/H: 19.1 cm x 7.2 cm x 4.2 cm

T-piece DURA made of PVC with union nut and integrated O-ring. 1" external thread with 3 x screw connection ø 1" internal thread.

Screw connections for quick mounting of solenoid valve batteries in valve boxes. Easy assembly and disassembly by means of screw connections and union nut, without tools and sealing tape.

  • Professional quality of the DURA brand
  • made of very robust hard PVC
  • integrated O-ring seal
  • operating pressure max. 10 bar


Dura 25mm PVC manifold - PVC - union fittings for solenoid valves "Manifold System Pro".

The Dura manifold fittings are made of PVC. They are designed in such a way that the manifold can be easily installed in a valve box or can be mounted on the wall. Dura's union fittings can be hand-tightened without tools.

All manifold connections have a 1" BSP thread. Combinations of 1 in. male BSP threads and 1 in. female threads are available, which allow for easy installation and maintenance of irrigation solenoid valves in a valve box. The union fittings allow components to be easily removed from an existing valve manifold for maintenance and replacement. The o-ring seals built into the female fittings automatically become tight when tightened, you don't need Teflon tape / PTFE tape.

When installing the Dura manifold, make sure that PE pipes are brought up to the manifold without tension, so that no lateral forces act on the DURA connectors. This can be achieved, for example, by using an additional angle in the PE pipe.


Dura Valve manifold fittings - Build your own valve boxes and wall manifolds with Dura union fittings

DURA fittings make it easy for you to connect valves to irrigation systems. You can use the multiple manifold from DURA. You can screw solenoid valves from Hunter or Rain Bird into the existing internal threads. The smooth faces of the solenoid valves are pressed onto the O-ring integrated in the manifold. This seals the entire valve manifold when hand tightened. This DURA fitting allows easy removal of valves for service even after many years. Professional tip: Set up the manifold so that e.g. solenoid valves are accessible from the right and left via union fittings. Then it is not necessary to disconnect PE lines or to disassemble the entire manifold from one end to replace a defective fitting in the middle!

DURA fittings are all 1" in size and are ideally suited for garden irrigation projects. A reducer fitting (1" male x 3/4" male) allows the fittings to be reduced to 3/4" if needed.

Customize your valve box to your liking, or order one of our pre-assembled valve boxes from the Plug&Rain system! Here you will find a large number of variants with a different number of valves and for all PE pipe sizes (24 mm BluLock, 25 mm PE pipe or 32 mm PE pipe).


  • Shipping weight: 0,16 kg
  • Item weight: 0,16 kg
Product safety information
Manufacturer information:
Dura
 
, , 
Reviews

Write the first review for this item and help others make a purchase decision!:

Others also bought: