PE pipe 16 mm PN 4 in various lengths
PE pipe 16 mm PN 4 in various lengths

Length
from 20,55 €
0,82 € per 1 m
incl. 19% VAT , plus shipping costs
Coil

This item has variations. Please select the requested variation.

Description

PE Pipe PN4: Pipe for your micro irrigation and drip irrigation.

For the installation of a micro irrigation you can use this PE pipe in the garden or on balcony and terrace. The installation is done e.g. to a water tap by means of an adapter piece to 3/4" external thread. Barb fittings or 16mm fittings can be used for mounting L-pieces, T-pieces or end pieces. The supply line serves as the main line for installing drip irrigation, spray irrigation or micro irrigation. It is connected to the faucet using an adapter from ¾" male thread to 13mm Barb. Optionally, a faucet control and a pressure reducer are interposed.

Depending on the line pressure and line length, approx. 0.6 m³ of water per hour can be pumped through a ½" pipe. This is sufficient to irrigate e.g. 50 drip points with 20 liters per hour in a drip irrigation system. For higher water requirements, several irrigation circuits must be set up. These can then be controlled e.g. with a 2-circuit water tap control or with a valve box.

To connect drippers or sprinklers for your irrigation to the PE pipe, the following options are available:

A: A hole is punched in the PE pipe using a 4mm punch and a dripper or sprinkler is inserted directly.

B: A hole is punched in the PE pipe, a 4mm branch is inserted, a 4mm ID hose is attached to it, and a dripper or sprayer is attached to it. The dripper is then fixed to the root ball with a ground spike, so it is above ground and less likely to get dirty.

C: With the patented quick assembly for the installation of a drip and spray irrigation. The branch is placed on the PE pipe, the mandrel bores into the pipe, then the branch is fixed by squeezing the clamp. No tools are necessary. The 4mm ID hose can be plugged on directly.pe-


PE pipe dimensions

  • outer diameter approx. 16mm
  • internal diameter approx. 13.8 - 14.0 mm.
  • wall thickness approx. 1.0 - 1.1 mm.


Specifications PE-pipe

  • max. pressure 4,0 bar
  • Polyethylene (PE) is UV-stable, weather-resistant, suitable for a pressure of up to 4.0 bar and can remain outside in winter when empty.

  • Compressive strength: PN 4
  • Pipe system: 16 mm
  • Content: 25,00 m
Reviews

Write the first review for this item and help others make a purchase decision!:

Others also bought: