Shut-off valve / plastic tap 1/2" (13mm ID)

Shut-off valve / plastic valve for 16 mm PE pipe (13 mm ID / 16mm OD).

Plastic ball valve for manual regulation of individual irrigation strands. The cock can also be used as an end piece to drain an irrigation strand for winter irrigation preparation. Flow rate continuously adjustable on the blue cock.

Dimensions

• Height:76 mm
• Width: 34 mm
• Depth: 20mm

Specifications

• Weight: approx. 10 g
• Suitable for PE pipe 16mm outer diameter (13mm inner diameter)

Installation stopcock for 1/2" PE pipe

Suitable for all common manufacturers of 1/2" PE pipe (16mm outer diameter / approx. 13mm inner diameter). Please make sure with a pressure reducer that the connections are not pressurized with more than 3 bar. These irrigation fittings are designed for 1/2" inch PE pipe or 16mm drip tubing, if the hose you are using is hose is larger or significantly softer, leaks may occur. Take then better 17mm connectors or fittings.

Perfect for manually closing off individual areas in your irrigation system, e.g. when the first beds are harvested in the summer, or plants that have already grown very well should only be watered during very long dry periods.

High impact plastic construction and very easy installation - use these durable irrigation connectors to connect your 1/2" drip irrigation tubing. EASY TO INSTALL. Secure and easy push-fit connection with no tools required to install. Simply slide the hoses firmly over the barbs to achieve a snug fit at the end of the connector. If desired, you can briefly dip the end of the tubing in a cup of hot water to soften the end of the tubing slightly before sliding it in.