Hunter EZ-1 single-station decoder with status LED

Hunter single-station decoder EZ-1

With the single-station decoder, remote solenoid valves can be controlled cost-effectively, as a 2-wire cable is sufficient for operation. If only one decoder is used per output, the distance to the solenoid valve can be up to 267 m at 0.8 mm² per cable. The maximum distance with two solenoid coils with decoders per output is 133 m with a cable of 0.8 mm² per cable. With a 4 mm² cable, a distance of up to 1.3 km is even possible.
No special earthing or overvoltage protection is required as they are operated at 24 V and 50 Hz.

The extremely reliable decoders have protection class IP68, so they can get wet without any worries and have a warranty period of 3 years. Should problems nevertheless occur, they are equipped with a Stauts LED for easy diagnosis.

The decoders are compatible with both the Hunter PC-DM (for PRO-C and HPC controllers) and EZ-DM (for ICC2 and HCC controllers) output modules and can be programmed without having to enter the serial number.

Dimensions

• Length: 31cm
• Width: 4,7cm
• Height: 3,1cm

Specifications

• Compatible with HCC and ICC2 controllers
• Supports up to 54 stations plus master valve
• No special cables required
• Hybrid operation of conventional and decoder stations
• Programmable decoders without serial numbers
• Cable lengths over 1 km possible
• EZ-1 single-station decoder with status LED
• EZ-DM module works in any controller slot