High-quality drip tube installation set for approx. 35 m² bed or 50 m hedge - in professional Plug&Rain^® quality

Execution for the Plug&Rain^®mikro system

Do your beds, flowerbeds or hedges suffer from heat and drought in the summer months? Are you looking for a particularly water-efficient irrigation system that can also supply water to narrow areas in your garden or plants in difficult terrain and on steep slopes? In this case, we recommend our drip tube, through which the water is released slowly and specifically into the root zone. This minimizes evaporation losses and irrigates the plants with pinpoint accuracy.

To irrigate a bed area, drip pipes are laid evenly on the ground at a distance of approx. 35 cm, the individual strands are connected with T-bars and fixed to the ground with earth hooks. For hedges, a drip tube is laid on both sides and the two strands are also connected together. Stand-alone bushes can be enclosed with a ring of drip tube. A connection with a suitable pressure reducer is used to supply the drip tube; the connection is connected to your 25 mm supply line using a clamp connector.
The Plug&Rain^® Expert drip pipe installation unit contains all the necessary parts to cover an area of around 35 m² with high-quality drip pipe for above-ground installation.

To connect the drip pipe to your water supply, you can find our supply line sets here, also with tap controllers such as the Hunter BTT.

The enclosed Expert drip pipe is suitable for both above-ground and underground use. If underground installation is required, the additionally available extension set (ZS-TREXP-02-VM or ZS-TRPREM-02-VM) must be used for underground installation.

Included in the set:

• 100 m high-quality Rain Bird drip pipe with pressure compensation, suitable for above-ground and underground installation
• High-quality brown earth hooks (100 pieces)
• XFF T-piece, 17 mm (10 pieces)
• XFF straight connector, 17 mm (5 pieces)
• XFF 90° angle connector, 17 mm (10 pieces)
• Lock-type end plugs, 17 mm (10 pieces)
• XFF installation tool for efficient and convenient working

Technical data, drip tube:

• Outlet diameter 16.1 mm
• Wall thickness 1.2 mm
• 33 cm dripper spacing and 2.3 liters/h per drip point
• Operating pressure 0.59 to 4.14 bar at water temperatures up to 38°C.

Recommended filtration 125µm.