Planning fee garden irrigation system up to 500m²

Planning service irrigation system at DVS Beregnung

Please send us after receipt of your order confirmation as feedback your floor plans with visible marking, which areas should be planned. After the planning has been completed by our planning experts, you will receive all information about the plan check of your irrigation system by email.

Irrigation system - the next steps:

Before we can plan your irrigation system, we need the following information from you:

• A plan to scale with beds and hedges drawn in, lawn areas and the areas you absolutely want to stay dry (digitally created or flat scanned, no photo please). In addition, a reference measurement such as the length of the property, the house or a garden shed.
• The amount of water available at 3.5 bar dynamic pressure and the water source (e.g. rainwater, 1.3m³/h). For the exact determination of this value, which is very important for the planning, we recommend our measuring device (https://dvs-beregnung.de/messgeraet-druck-durchfluss-zur-bestimmung-der-verfuegbaren-wassermenge). If you have a pump, you can read the value in the characteristic curve of your pump (pumpable water volume at 35m pumping height plus installation depth).
• Special features on the property such as areas where pipes cannot/may not be laid.
• The planned or already existing position of the water connection, the control (220V socket) and the valve box.
• Positions for water sockets for manual water withdrawal (if desired).
• Wanted quality level of your irrigation system (ECO: simple and price-conscious / EXPERT: high quality at an optimal price / Premium: uncompromising high quality)
• Attention: Please note that we cannot take into account existing pipes or other installations, as this is usually very time-consuming and may not lead to a satisfactory result. In this case, we strongly advise you to plan your irrigation system yourself using our free planning software, the DVS Irrigation Planner.

We take over the complete planning of your irrigation system including the creation of a material list and individual installation instructions for you. For this we charge a planning fee of 125€. This includes 2 hours of working time, which is usually sufficient for planning. For corrections, rework and larger special requests, it may be that the time budget is not enough, then we would carry out the further work in consultation with you at an hourly rate of 79 € plus VAT.

As soon as we have all the information about your garden, we can start the planning at short notice and complete it within a few days.

If you would like to estimate the material costs for your irrigation system in advance, you can make an approximate calculation here: https://dvs-beregnung.de/services/bewaesserung-preiskalkulator.

If you have additional wishes or hints concerning the planning, please let us know.