Pressure / Flow Rate Meter for Determining Available Flow Rate

Measuring device for determining the available water quantity

Your first step in the professional planning of an automatic garden irrigation system!

The indispensable tool for planning an irrigation system

Easily determine the capacity of your water supply with a 10L bucket and this measuring device. The measured value is the basis for determining the maximum number of sprinklers or the maximum number of drip points of the drip tube in an irrigation zone.

In order for the sprinklers, sprinklers or drip tube to work correctly and for the throw range to meet expectations, they must be operated with sufficient water pressure. This means that only enough water should be tapped to ensure that the operating pressure of the system does not fall below 3.5 bar.

This maximum extraction volume can be easily and quickly determined using our measuring device.

Procedure:
- The measuring device is connected to the tap.
- The line is completely opened.
- The flow at the measuring device is reduced with the ball valve until the manometer indicates a line pressure of 3.5 bar.
- Now a 10 liter bucket is filled with the flowing water and the time required for filling is measured.
- The water flow at 3.5 bar in liters / hour or m³ / h can then be determined from the number of seconds it takes to fill the 10L bucket.

The measuring device fits standard faucets with 3/4” male thread (26.44 mm).

Contents:

- Measuring device for determining the available water quantity
- Information material