Hunter MP Rotator strip MP-RS, 1.5 m × 4.6 m [pack of 10]

HUNTER MP Rotator MPRCS515 (MP-RS) Strip Rotating Nozzle Right

The multi-jet rotating nozzle from Hunter for strips up to 1.5 m x 4.6 m

Equipped with this nozzle, your Plug&Rain MP Rotator mounting kit or spray nozzle housing becomes a rotating spray nozzle. This offers several advantages:

- With the same throw distance, the MP Rotator uses around three times less water than a standard spray nozzle.
- The lower precipitation ensures that even on heavier soils, the precipitation seeps away and surface runoff is prevented. - The pipes can be smaller in size and a larger area can be irrigated per irrigation circuit.

Regardless of the selected sector setting and the set throw distance, the  precipitation amount remains virtually identical and is around 10 mm precipitation per hour for all standard models (MP1000, MP2000, MP3000, MP3500).
- This allows the use of different standard rotators with different sectors and throw distances in one irrigation cycle. - The creation of an irrigation concept with uniform precipitation rates is greatly simplified.

Instead of producing fine droplets, the MP Rotator irrigates with rotating jets.
- This prevents water loss due to spray formation
- Wind drift of irrigation water is greatly reduced
- Throw distances of up to 10.5 meters are achieved, which significantly reduces the number of sprinklers required for larger lawn areas.

For these reasons, we recommend using MP Rotators for watering lawns.

Watering a lawn in a home garden is much easier with MP Rotators than with gear-driven sprinklers and usually leads to better results, as the sprinkler's precipitation remains the same even when the sector or throw distance is changed. In addition, home gardens usually require throw ranges of less than 6 m, which cannot be achieved with gear sprinklers.

That's why MP Rotators are the first choice for watering your lawn!

To help you plan your irrigation project, we have developed the DVS Sprinkler Planner, an online tool where you can draw your garden or upload plans. The coverage with MP Rotators is automatically calculated and visualized here. Manual adjustments are also possible afterwards: https://dvs-beregnung.de/GARTEN-PLANER

We use the 2.1 bar housing when we want to achieve particularly short throw distances with the MP Rotators.
The locations where the housings with brown caps (PRS30 housings) are used are marked in the plan (DVS irrigation planner) with a * symbol or with the addition PRS30.

The MP-Rotator strip nozzles are designed for a simple overlapping layout. Each strip nozzle sprays up to the next one. Where possible, strip nozzles should be positioned diagonally opposite each other, i.e., alternately on both sides of the strip.

Technical data:
- Fine thread 5/8"–28 IG
- Right corner strip
- “Rectangular” spray pattern, spraying from the right corner to the front (1.5 m) and left (4.5 m) - Adjustment screw to reduce the throw distance by up to 25% - For all housings with fine thread 5/8“–28 AG (Hunter, Rain-Bird, etc.)
- Optimal function with the HUNTER series ”PROS-PRS40" spray housing
- Color code: copper

Hydraulic properties:
- Water consumption: approx. 0.1 m³/h (at 1.5 m x 4.6 m throw distance)
- Recommended operating pressure: 2.8 bar (280 kPa), maximum pressure: 4 bar

Manufacturer link:
https://www.hunterindustries.com/de/product-line/MP%20Rotator