Hunter MP Rotator 815 (3 to 4 m radius), various sectors (H/TQ/F)

HUNTER MP Rotator MP-815 (3 to 4 m radius), available in spray angles from 90° to 360° (MP815H/MP815TQ/MP815F)

The multi-jet rotary nozzle from Hunter for spray widths of 3 to 4 m

Equipped with this nozzle, your spray nozzle housing becomes a rotary spray head. With the same throw distance, this nozzle uses three times less water than a standard spray nozzle. Regardless of the selected throw distance, the precipitation amount remains virtually identical. Perfect for converting an existing system with insufficient sprinkler spacing or insufficient pressure. This nozzle is also ideal for watering all types of plants, especially for new installations with low pressure.
The 0.2 m³/h precipitation rate of the MP815 series is suitable for combination with the MP800 series MP Rotators.

Due to their higher precipitation rate of 20 mm/h, the sprinklers of the 815 MP-Rotator series should not be operated with the standard rotators in the same valve circuit. However, they can be combined with rotators of the 800 series without any problems.
The 20 mm/hour precipitation rate of the MP815 series is suitable for average soil density, slight slopes, and small areas.

Instead of producing fine droplets, the MP Rotator irrigates with rotating jets.
- This prevents water loss due to spray formation
- Wind drift of irrigation water is greatly reduced
- It achieves throw distances of up to 10.5 meters, which significantly reduces the number of sprinklers required for larger lawn areas.

For these reasons, we recommend using MP Rotators for watering lawns.

Watering a lawn in a home garden is much easier with MP Rotators than with gear-driven sprinklers, and usually leads to better results, as the sprinkler's precipitation remains the same even when the sector or throw distance changes. In addition, home gardens usually require throw ranges of less than 6 m, which cannot be achieved with gear-driven sprinklers.

That's why MP Rotators are the first choice for watering your lawn!

To help you plan your irrigation project, we have developed the DVS Sprinkler Planner, an online tool where you can draw your garden or upload plans. The coverage with MP Rotators is automatically calculated and visualized here. Manual adjustments are also possible afterwards: https://dvs-beregnung.de/GARTEN-PLANER

We use the 2.1 bar housings when we want to achieve particularly short throw distances with the MP Rotators.
The locations where the housings with brown caps (PRS30 housings) are used are marked with an * symbol or with the addition PRS30 in the plan (DVS irrigation planner).

Technical data MP815:
- Radius 3 to 4 m
- Spray angle selectable between 90-210° (semicircle), 210° to 270° (three-quarter circle) and 360° (full circle) - Adjustment screw for regulating the throw distance - For all housings with fine thread 5/8"–28 AG (Hunter, Rain-Bird, etc.) - Optimal function with the HUNTER PROS-PRS40 pop-up sprinkler housing (built-in pressure reduction to 2.8 bar) and the Plug&Rain MP-Rotator mounting sets Expert and Premium

Hydraulic properties:
- Recommended operating pressure: 2.8 bar (280 kPa), maximum pressure: 4 bar - For desired throw distances of less than 2.4 m, an operating pressure of 2.1 bar (207 kPa) is recommended; the PROS-04-PRS30 is used for this purpose, for example.

Manufacturer link:
https://www.hunterindustries.com/de/product-line/MP%20Rotator