Hard PVC telescopic screw connection, angle, 1" male thread × 1" female thread PN10

Elbow 1“ external thread x 1” internal thread - Assembly connections for valve distribution

• Angle piece 1“ female thread x 1” male thread
• 1“ external thread (33.25 mm) with 1 x screw connection Ø 1” internal thread (30.29 mm)
• Made of highly stable PVC
• With integrated O-ring in the female screw connection
• Pressure resistant up to 10 bar.
• Color: PVC gray
• L/W/H: 7.8 cm x 6.3 cm x 4.2 cm

Angle piece made of PVC with union nut and integrated O-ring. 1“ external thread with 1 x screw connection with 1” internal thread.

PVC mounting connections for solenoid valves

Screw connections for quick installation of solenoid valve batteries in valve boxes. Easy installation and removal using screw connections and union nut, without tools or sealing tape.

• Professional quality
• Made of very robust hard PVC
• Integrated O-ring seal
• Maximum operating pressure 10 bar

25 mm PVC distributor - union fittings for solenoid valves

The distributor fittings are made of PVC. They are designed so that the distributor can be easily installed in a valve box or mounted on the wall. The union fittings can be tightened by hand without tools.

All distributor connections have a 1" BSP thread. There are combinations of 1-inch BSP external threads and 1-inch internal threads, which allow for easy installation and maintenance of irrigation solenoid valves in a valve box. The union fittings allow components to be easily removed from an existing valve manifold for maintenance and replacement. The O-ring seals integrated into the female screw connections automatically seal when tightened, so you do not need Teflon tape/PTFE tape.

When installing the manifold, care should be taken to ensure that PE pipes are connected to the manifold without tension so that no lateral forces act on the connectors. This can be achieved, for example, by using an additional elbow in the PE pipe.

Valve distribution fittings - Build your own valve boxes and wall distributors with union fittings

The fittings make it easy to connect valves to irrigation systems. You can screw Hunter or Rain Bird solenoid valves into the existing internal threads. The smooth end faces of the solenoid valves are pressed onto the O-ring integrated in the manifold. This seals the entire valve manifold when they are tightened by hand. These fittings also allow for easy removal of valves for servicing, even after many years.

Pro tip: Install the manifold so that solenoid valves are accessible from the right and left via union fittings. Then it is not necessary to disconnect PE pipes or dismantle the entire manifold from one end in order to replace a defective fitting in the middle!

The screw connections are all 1“ in size and are ideal for garden irrigation projects. Using a reducing fitting (1” AG x 3/4“ AG) the fittings can be reduced to 3/4” if necessary.

Design your valve box individually according to your ideas, or order one of our pre-assembled valve boxes from the Plug&Rain system! Here you will find a large number of variants with different numbers of valves and for all PE pipe sizes (24 mm BluLock, 25 mm PE pipe or 32 mm PE pipe).