T-piece connector for PE pipe 1/2" (13mm ID)

T-piece connector for PE pipe 1/2" (13mm inner diameter).

T-pieces can be used to create branches for spur lines in the supply line. They are also suitable for setting up different irrigation circuits and connecting them to each other. These T-pieces are primarily suitable for PE-hoses (16mm), but also drip hoses (16mm) can be connected perfectly and easily.

Dimensions

• Height: 74 mm
• Width: 44 mm
• Depth: 17 mm
• Weight: 6 g

Installation T-piece for 1/2" PE pipe

Suitable for all common manufacturers of 1/2" PE pipe (16mm outer diameter / approx. 13mm inner diameter). Please make sure with a pressure reducer that the connections are not pressurized with more than 3 bar. These irrigation fittings are designed for 1/2" inch PE pipe or 16mm drip tubing, if the hose you are using is hose is larger or significantly softer, leaks may occur. Take then better 17mm connectors or fittings.

Perfect for branching PE pipe at a 90° angle if the pipe is to be split into multiple stub or ring lines.

High impact plastic construction and very easy installation - use these durable irrigation connectors to connect your 1/2" drip irrigation tubing. EASY TO INSTALL. Secure and easy push-fit connection with no tools required to install. Simply slide the hoses firmly over the barbs to achieve a snug fit at the end of the connector. If desired, you can briefly dip the end of the tubing in a cup of hot water to soften the end of the tubing slightly before sliding it in.