Angle connector 90° for PE pipe 1/2" (13mm ID) 10pcs economy pack

Angle connector 90° for PE pipe 1/2" (13mm inner diameter).

These L-pieces are used to guide a supply hose around corners at a right angle. The connectors are primarily intended for use with standard PE tubing, but use with 16mm drip tubing is also possible.

Dimensions

• Height: 44 mm
• Width: 44 mm
• Depth: 17 mm

Specifications

• Number per set: 10 pcs.
• Weight: 50 g

Installation bracket for 1/2" PE pipe

Suitable for all common manufacturers of 1/2" PE pipe (16mm outer diameter / approx. 13mm inner diameter). Please make sure with a pressure reducer that the connections are not pressurized with more than 3 bar. These irrigation fittings are designed for 1/2" inch PE pipe or 16mm drip tubing, if the hose you are using is If the hose you are using is larger or much softer, leaks may occur. It is better to use 17mm connector fittings.

Perfect for exact corners in PE pipe or 90 degree installations, if the pipe cannot be laid in a radius (approx. 60cm reel diameter).

High impact plastic construction and very easy installation - use these durable irrigation fittings to connect your 1/2" drip irrigation tubing. EASY TO INSTALL. Secure and easy push-fit connection with no tools required to install. Simply slide the hoses firmly over the barbs to achieve a snug fit at the end of the connector. If desired, you can briefly dip the end of the tubing in a cup of hot water to soften the end of the tubing slightly before sliding it in.