End plug / closure for 1/2" PE pipe (16 mm ED /13 mm ID)

End plug / closure for PE pipe 1/2" (13 mm inner diameter)

This end plug is ideal for closing off the end of PE hoses, for example to end branch lines. This end plug is primarily suitable for all PE hoses with an outer diameter of 16mm, but it can also be used for drip hoses with the same diameter.

Dimensions:

• Height: 37 mm
• Width: 17 mm
• Depth: 17 mm
• Weight: 2 g

Installation end piece for 1/2" PE pipe

Suitable for all common manufacturers of 1/2" PE pipe (16mm outer diameter / approx. 13mm inner diameter). Please make sure with a pressure reducer that the connections are not pressurized with more than 3 bar. These irrigation fittings are designed for 1/2" inch PE pipe or 16mm drip tubing, if the hose you are using is hose is larger or significantly softer, leaks may occur. Take then better 17mm connectors or fittings.

Perfect for the closure at the end from the PE pipe, if the pipe was installed as a stub.

High impact plastic construction and very easy installation - use these durable irrigation connectors to connect your 1/2" drip irrigation tubing. EASY TO INSTALL. Secure and easy push-fit connection with no tools required to install. Simply slide the hoses firmly over the barbs to achieve a snug fit at the end of the connector. If desired, you can briefly dip the end of the tubing in a cup of hot water to soften the end of the tubing slightly before sliding it in.