Solenoid valve HV Valve 1" IT with flow regulation.
Outstanding performance. Unsurpassed durability.
The 100-HVF solenoid valve features an eccentric diaphragm for smooth closing, less water hammer. The compact design results in a smaller turning radius, which is especially beneficial in tight installations (multiple valves in a single valve box).
The captive combination drive screws provide easy access and faster bonnet removal for servicing the solenoid valve.
The material is a glass fibre reinforced polypropylene body for optimum strength and long life.
Patented, eccentric, pressure-balanced Buna-N diaphragm is perfectly equipped for long-term use with self-cleaning 90-mesh (200 micron) pilot water filter and secured stainless steel spring. The eccentric design ensures smoother closing and less water hammer during operation.
The four loadable, secured multi-drive bonnet screws result in faster, easier maintenance, as the screws can be unscrewed with half the number of turns.
The housing is made of glass fibre reinforced polypropylene for high strength.
The particularly compact design results in a small turning radius, which is especially recommended for tight installations.
Manual external venting allows debris to be flushed out during installation and system start-up.
Internal venting for splash-free manual operation. This solenoid valve is suitable for low flow applications and for green surface drippers when a 200 mesh filter is installed upstream. By means of the integrated flow regulation, the flow rate can be perfectly adjusted to the requirements during operation.
The valve is compatible with the Gardena system. Gardena sprinklers and Gardena drip pipe can be controlled. The winterisation is done with a compressor 10 bar / 220V (not suitable are 12 V compressor test without pressure vessel, 12 Volt compressor or mini compressors). 3 way solenoid valve from Rain Bird for garden irrigation.
- Length: 11.7 cm
- Width: 11.2 cm
- Height: 7.9 cm
- Flow rate: 0.05 - 6.82 m³/h
- Operating pressure: 1.0 - 10.3 bar
- Water temperature: up to 43° C
- ambient temperature up to 52° C
- Solenoid valve 24 VAC, 50/60 Hz
- Maximum inrush current: 0.29 A at 60 Hz
- Holding current: 0.091 A at 60 Hz
- coil resistance: 70 to 85 Ohm
- Connection: 1 inch IT x 1 inch IT
Operating instructions: (see page 4)
- Shipping weight: 0,31 kg
- Item weight: 0,31 kg