Solenoid valve Rain Bird 100-HV valve 1" IT - female thread
Outstanding performance. Unsurpassed durability.
The 100-HV solenoid valve features an eccentric diaphragm for smooth closing, less water hammer. Compact design results in a smaller turning radius, which is especially beneficial in tight installations (multiple valves in a single valve box).
Captive combination drive screws provide easy access and faster hood removal for solenoid valve maintenance.
Material is a fiberglass reinforced polypropylene body for optimum strength and long life.
Features
Patented, eccentric, pressure-balanced Buna-N diaphragm is perfectly equipped for long-lasting use with self-cleaning 90-mesh (200 micron) pilot water filter and secured stainless steel spring. Eccentric design provides smoother closing and less water hammer during operation.
The four load-bearing, secured multi-drive hood screws result in faster, easier maintenance as the screws can be unscrewed with half the number of turns.
The housing is made of fiberglass-reinforced polypropylene for high strength.
The extra compact design results in a small turning radius, which is especially recommended for tight installations.
Manual external relief allows debris to be flushed out during installation and system start-up.
Internal venting for splash-free manual operation. This solenoid valve is suitable for low flow applications and green surface drippers when a 200 mesh filter is installed upstream.
Dimensions
- Length: 11.7 cm
- Width: 11.2 cm
- Height: 7.9 cm
Technical data
- flow rate: 0.05 - 6.82 m³/h
- Operating pressure: 1.0 - 10.3 bar
- Water temperature: up to 43° C
- ambient temperature up to 52° C
- Solenoid valve 24 VAC, 50/60 Hz
- Maximum inrush current: 0.29 A at 60 Hz
- Holding current: 0.091 A at 60 Hz
- Coil resistance: 70 to 85 ohms
- Connection: 1 inch IT x 1 inch IT
Operating instructions: (see page 4)
https://www.rainbird.com/sites/default/files/media/documents/2017-07/man_HV-HVF-Valves.pdf
- Shipping weight: 0,28 kg
- Item weight: 0,28 kg