Cross connector for PE pipe (ID 13mm)

Cross connector for PE pipe (13mm inner diameter).

With this cross connector, a 1/2" PE pipe can be laid quickly and cleanly. Usually, the water is supplied through one of the four connections of the cross connector, three outlets can be realized via the remaining outlets. Primarily, the connector is intended for 16mm PE pipes, but drip hoses with the same diameter can also be attached with the connector.

Dimensions

-Height: 71mm
-width: 71mm
-depth: 17mm

Specifications

-Weight: 8g
-Connection piece for 1/2" supply hose (16mm OD; 13mm ID)

Installation cross piece for 1/2" PE pipe

Suitable for all common manufacturers of 1/2" PE pipe (16mm outer diameter / approx. 13mm inner diameter). Please make sure with a pressure reducer that the connections are not pressurized with more than 3 bar. These irrigation fittings are designed for 1/2" inch PE pipe or 16mm drip tubing, if the hose you are using is hose is larger or significantly softer, leaks may occur. Take then better 17mm connectors or fittings.

Perfect for connecting four PE pipes during installation, ideal for doing more complex installations with drip tubing.

High impact plastic construction and very easy installation - use these durable irrigation connectors to connect your 1/2" drip irrigation tubing. EASY TO INSTALL. Secure and easy push-fit connection with no tools required to install. Simply slide the hoses firmly over the barbs to achieve a snug fit at the end of the connector. If desired, you can briefly dip the end of the tubing in a cup of hot water to soften the end of the tubing slightly before sliding it in.