Mounting unit Plug&Rain water junction box 25MM EXPERT - SIMPLE.HIGH-QUALITY.PROFESSIONAL.
Plug&Rain® water junction box 25mm Expert

Connection
Quality
76,60 €
incl. 19% VAT , plus shipping costs
Available immediately
Deliverydate: 26.08.2025 - 01.09.2025 (DE - int. shipments may differ)
Description

Water tap connection socket 25mm Plug&Rain Expert

The Plug&Rain® water tap connection socket Expert for 25mm (¾ inch) PE pipe creates a simple push-on connection from the water tap to the underground irrigation system via a hose. Due to the large internal cross-sections of the components used, pressure losses are kept low, even at high flow rates such as occur in irrigation systems.

The Plug&Rain® tap junction box in the Expert version consists of the following components:
- A high-quality quick coupling for increased flow to be screwed onto the water tap.
- 2 metres of ¾ inch (19mm) quality hose with diagonal reinforcement and a burst pressure of 30bar, attached to which are two high-quality quick-action hose sections with enlarged internal cross-sections for a greater flow rate.
- One Rain Bird water socket plug with 90° angle and a quick coupling for increased flow to connect the hose
- A high quality Rain Bird water socket with cover to protect against contamination for flush floor installation with ready fitted 25mm (¾ inch) compression connector in a high quality finish.

The water junction box for 25mm PE pipes is correctly sized for water consumption of up to 1.8m³/h and pipe lengths of up to 50 metres per irrigation circuit. For systems with an even higher flow rate or with exceptionally long pipes, we recommend designing the system and thus also the tap junction box with 32mm (1 inch) PE pipe.

For the parts of the irrigation system that are permanently under supply pressure, PE pipe with a pressure resistance of 10bar at 20°C (PN10) or more should always be used.

The set in the Expert version is pre-assembled.

The quick coupling can be screwed onto ¾" (26.44mm) and 1" (33.25mm) water taps, the ready-assembled hose can then be plugged onto the quick coupling and the water socket plug.

Dimensions:
- Can approx. h 20cm, Ø approx. 6.5cm

The Plug&Rain® water tap connector box Expert is intended for outdoor use only.


Reviews

Write the first review for this item and help others make a purchase decision!: