Solenoid valve fitting Tavlit - manifold for 2 solenoid valves (3 x 1" IT, 1 x 1" ET)

TAVLIT DISTRIBUTOR for 2 solenoid valves: 1" male x 3" female - T-piece for solenoid valve fitting.

Tavlit Swivel Fitting: for easy and quick installation of water and irrigation systems. The manifold for 2 solenoid valves is used to screw components together in irrigation systems. The union allows components to be interchanged in the installation, as screwing them apart does not result in a change in overall length.

The Tavlit fitting is used, for example, to screw solenoid valves, PE pipe and clamp connectors together. In garden irrigation, individual valve boxes, valve distributors, filter units,
master valves, etc.

The TAVLIT threaded fittings with swivel are used to realize quick and easy installations in irrigation systems. Due to the internal O-rings the installation is done without the use of
Teflon. Irrigation systems can thus be individually piped. TAVLIT threaded fittings are supplied ready for installation with EPDM O-rings. In addition to irrigation water, the components are resistant to chemicals and fertilizers.

Installation of the Tavlit fittings is very simple and safe, as no sealing is required. There is no need to work with Teflon or hemp. The unions are simply hand tightened. The swivel couplings press the component onto the opposite O-ring, making the connections directly watertight and allowing them to be directly pressurized after assembly.

Technical data TAVLIT DISTRIBUTOR FOR 2 MAGNETIC VALVES:

Tavlit Swivel Distributor with 1" ET to 3 x 1" IT
maximum working pressure: 10bar
Glass fiber reinforced PP plastic (polypropylene)
Swivel fitting for disassembly
Self-sealing O-ring made of EPDM
Assembly and sealing without Teflon tape

Translated with www.DeepL.com/Translator (free Version)