Pedrollo self-priming multistage centrifugal pump PLURIJETm 4/80, 230 V to 4.8 m³/h, stainless steel impellers

Self-priming multistage stainless steel centrifugal pump PLURIJET 4-80 from Pedrollo

The PLURIJET pump from Pedrollo is a self-priming multistage stainless steel centrifugal pump for irrigation and water supply. It is a low-noise, energy-efficient pump for pumping water even in cases where air is also being pumped. The PRESFLO pump controller is recommended for operation; this protects the pump from running dry and automatically switches the pump on depending on the pressure and off depending on the flow. The multi-stage, self-priming PLURIJET pump ensures a suction of up to 9 metres without the drop in flow rate that would be the case with a normal jet pump due to the injector (Venturi effect).

Further Information About the pump can be found here.

Installation and application

• House water distribution and pressure boosting in conjunction with expansion vessels
• Water recovery systems and irrigation
• Groundwater extraction / wells
• Rainwater utilisation
• Suitable for pumping clean water
• Installation in well ventilated, closed rooms

Technical features

• Max conveyor height: 52 m
• Max fan volume: 4.8 m³/h
• Max operating pressure 6 bar
• Suction height: 9 m
• Pump protection: X4
• Inlet connection: 1"
• Outlet connection: 1"
• Dimensions: 392 x 182 x 183 mm
• Weight: 10.5 kg
• Power 550 W
• Voltage 230 V
• Amperage 3.9 A
• Frequency 50 HZ