Pump control EASY Small wired for 230V Press Flow Control Pedrollo

Pump control wired pressure and flow rate for well pumps and cistern pumps wired


105,00 €
incl. 19% VAT , Free shipping (Paket)
Description

Electronic pump control Easy Small wired - PEDROLLO PRESS FLOW CONTROL

Press-Flow- Sensor for switching well pumps and cistern pumps for irrigation.
The Easy Small can switch pumps with a motor power of up to 1.5 KW, has an
integrated dry-running protection and a fixed switch-on pressure of 1.5 bar.
The Pres-Flow module is ready to plug in and can be used immediately.

Description of Pedrollo Easy Small pump controller


Flow and pressure sensor suitable for controlling and protecting single-phase well and cistern pumps up to 1.5 kW (for household applications). The controller starts the pump when the system pressure drops. This pressure drop can be caused by a solenoid valve activated by a watering computer, as well as by manual water withdrawal from a water outlet or tap.
After closing the solenoid valve or the tapping point, the pump stops as soon as the flow rate in the main line falls below 2 l/min.

PROPERTIES

  • Type of liquid: clean water
  • Area of application: domestic
  • Applications: irrigation, water supply systems, pressurization systems
  • Typology: accessory
  • Family: Easysmall-Easypress-Presflo Multi
  • Maintenance-free and space-saving
  • Easy to install and use


PERFORMANCE

• Max. flow: 200 l/min (12 m3/h)
• Max. operating pressure: 10 bar
• Switch-on pressure: 1.5 bar

RANGE OF USE

• Temperature of the liquid to be pumped +50 °C
• Ambient temperature up to +40 °C
• Bursting pressure 40 bar
• Protection class: IP 65
• Voltage: 230 V - Frequency: 50/60 Hz
• Max. current: 16 A

DESIGN AND SAFETY STANDARDS

• Resin-coated, easily replaceable circuit board suitable for use in tropical conditions for complete protection against moisture, built into the housing with IP 65 protection

The circuit board inside the EASYSMALL has undergone the strictest EMC tests for electromagnetic compatibility (low interference and high resistance to interference) to ensure reliable operation anywhere
• EASYSMALL including manometer

INSTALLATION AND USE

The flow and pressure sensor is used to control and protect single-phase pumps up to 1.5 kW (for domestic use). The pump is started when the system pressure drops (e.g. when a tap is opened) and stops when the flow rate drops below 2 l/min (tap closed). The Easy Small is equipped with an integrated non-return valve. The module can be mounted vertically or horizontally. The maximum height difference between the EASYSMALL control and the highest tap is 11 meters. The Easy Small can be mounted in an environment with up to 90% humidity, so also in a well shaft.

RECOMMENDED ACCESSORIES IN ADDITION TO THE STANDARD INSTALLATION

In order to avoid frequent restarts, we recommend installing a small expansion tank.

APPLICATION:

The Pedrollo Easy Small pump controller is suitable for installation in domestic garden irrigation projects together with a well pump or cistern pump. The pump controller is ideally suited for the pressure- and flow-dependent control of the pump in the following areas: water pumping from rainwater cisterns and wells, domestic garden irrigation with lawn irrigation, hedge and bed irrigation, wells with a maximum delivery rate of 400 l/h and a maximum pressure of 10 bar.

m³; for pumping rainwater from cisterns and wells, watering house gardens with lawn watering, watering hedges and flowerbeds, wells with clear water that is as free of sand as possible.

PEDROLLO EASY SMALL SCOPE OF DELIVERY:

Pedrollo Easy Small pump control unit
Ready-to-use cabling
Pedrollo manual.


INSTALLATION INSTRUCTIONS:

The Pedrollo Easy Small pump control can be fitted either to the outlet opening of the pump or at any point within the constant pressure line between the pump and the main valve or between the pump and the valve shaft in an irrigation system. No other taps may be installed between the well or cistern pump and the Easy Small dü, as otherwise the water withdrawal would take place in the measuring range. The module can be used with either a horizontal or vertical outlet by simply changing the screw settings.


  • Shipping weight: 0,80 kg
  • Item weight: 0,80 kg
Reviews

Write the first review for this item and help others make a purchase decision!:

Notify me when this item is available

(* = Mandatory fields)

Please see our privacy notice