Hunter MP Rotator 1000 (3 to 4 m radius), various sectors (Q/H/TQ/F)

HUNTER MP Rotator MP-1000 (3 to 4 m radius), available in spray angles from 45° to 360° (MP1000Q/MP1000H/MP1000TQ/MP1000F)

Hunter's multi-jet rotary nozzle for spray widths of 3 - 4 m

Equipped with this nozzle, your Plug& Rain MP-Rotator mounting set or your spray nozzle housing into a rotating jet sprinkler. This offers several advantages:

- With the same throw distance, the MP Rotator uses about three times less water than a standard spray nozzle. - The lower precipitation ensures that even heavier soils can absorb the precipitation, preventing surface runoff.
- The pipes can be smaller in size and a larger area can be irrigated per irrigation circuit.

Regardless of the selected sector setting and the set throw distance, the precipitation amount remains virtually identical and is around 10 mm per hour for all standard models (MP1000, MP2000, MP3000, MP3500) is around 10 mm of precipitation per hour.
- This allows the use of different standard rotators with different sectors and throw ranges in one irrigation cycle.
- This greatly simplifies the creation of an irrigation concept with a uniform precipitation rate.

Instead of producing fine droplets, the MP Rotator irrigates with rotating jets.
- This prevents water loss due to spray formation
- Wind drift of irrigation water is greatly reduced
- It achieves throw distances of up to 10.5 meters, which significantly reduces the number of sprinklers required for larger lawn areas.

For these reasons, we recommend using MP Rotators for watering lawns.

Watering a lawn in a home garden is much easier with MP Rotators than with gear-driven sprinklers and usually leads to better results, as the sprinkler's precipitation remains the same even when the sector or throw distance is changed. In addition, home gardens usually require throw distances of less than 6 m, which cannot be achieved with gear sprinklers.

That's why MP Rotators are the first choice for watering your lawn!

To help you plan your irrigation project, we have developed the DVS Sprinkler Planner, an online tool where you can draw your garden or upload plans. The coverage with MP Rotators is automatically calculated and visualized here.
Manual adjustments are also possible afterwards: https://dvs-beregnung.de/GARTEN-PLANER

We use the 2.1 bar housings when we want to achieve particularly short throw distances with the MP Rotators.
The locations where the brown cap housings (PRS30 housings) are used are marked with an * symbol or with the addition PRS30 in the plan (DVS irrigation planner).

Technical data MP-1000:
- Radius 4 m, reducible to 3 m
- Spray angle selectable between 45° (quarter circle), 90° to 210° (semicircle), 210° to 270° (three-quarter circle) and  360° (full circle)
- Adjustment screw for reducing the throw distance by 25%
- For all housings with fine thread 5/8"–28 AG (Hunter, Rain-Bird, etc.)
- Optimal function with the HUNTER PROS-PRS40 pop-up sprinkler housing (built-in pressure reduction to 2.8 bar) and the Plug&Rain MP-Rotator mounting sets Expert and Premium.

Hydraulic properties
- Recommended operating pressure: 2.8 bar (280 kPa), maximum pressure: 4 bar

Manufacturer link:
https://www.hunterindustries.com/de/product-line/MP%20Rotator