Plug&Rain ECO Drip Irrigation Set 35m² 24mm

Drip pipe assembly set for approx. 35m² bed or 50m hedge - in inexpensive Plug&Rain Eco quality.

Version for 24mm PE supply line (BluLock system)

Your flower beds, bushes or hedges suffer from heat and drought during the summer months? You want a particularly water-efficient irrigation system that can also supply water to narrow areas in your garden or plants on difficult terrain and steep slopes? In this case we recommend our drip pipe, through which the water is slowly and specifically released into the root zone. In this way, evaporation losses are minimised and the plants are watered with pinpoint accuracy.

To irrigate a bed area, drip pipes are laid evenly on the ground at a distance of approx. 35 cm, the individual strands are connected with T-pieces and fixed to the ground with soil hooks. For hedges, a drip pipe is laid on both sides and the two strands are also connected to each other. Individually standing bushes can be enclosed with a ring of drip pipe. A connection with a suitable pressure reducer is used to supply the drip pipe, the connection is connected to your 24mm supply line with a clamp connector.

The Plug&Rain® Eco drip pipe installation set contains all the necessary parts to irrigate an area of around 35m² with drip pipe in above-ground installation. The connection set is intended for the end connection to your 24mm PE supply line.

The Plug&Rain® Eco installation set for irrigation with drip pipe is supplied in individual parts and is only suitable for above-ground use.

Included in the set:
- 100m standard drip pipe with pressure compensation, suitable for above-ground installation.
- Connection set for 24mm PE pipe with BluLock connector, Swing Joint, pressure reducer and 16mm drip pipe connection incl. hose clamp
- 100 standard ground hooks
- 16mm T-piece (10 pieces)
- Straight 16mm connector (5 pieces)
- 16mm 90° Angle Connector (10 pieces)
- 16mm end plugs (10 pieces)

Technical data:
- Drip tube: Ø 16mm, 33cm drip distance and 2.1 litres/h per drip point