3-Valve Box Hunter PGV 9V DC Latching Solenoid with Flow Regulation and Compressed Air Cnnection, 25mm (3/4") Plug&Rain Expert

High-quality underfloor valve box for 3 zones with Hunter 9V DC valves - in professional Plug&Rain Expert Quality

9V DC version for Hunter Node BT and other battery controllers, with connections for 25mm PE Piping

The heart of your irrigation system is our Plug&Rain valve box, which controls the water distribution in your garden. The sturdy design and high-quality components from leading irrigation manufacturers ensure that your garden irrigation system will function reliably for many years.

Pre-assembled and tidy - just connect the PE pipes and cables to the valve box.

The Plug&Rain valve box comes pre-assembled in a sturdy shipping box. All you have to do is screw on the clamp connectors and connect the control cable (which has to be bought separately) to the solenoid valves.
A complete electrical connection set with all the necessary electrical connectors and an electrical distribution box is included.

A control unit is required to use the box. This is programmed so that the individual zones are watered in the order you want. We recommend using our weatherproof DVS Plug&Rain control cables to connect the valves to your control unit. For the number of wires required, calculate one common wire (earth) plus one control wire per valve. A 4 valve box therefore requires 5 wires for the control.

The advantages of your Plug&Rain valve box from DVS Sprinkling

VALVE DISTRIBUTION: Controls the flow of water into the irrigation circuits
FAST INSTALLATION: Easy installation in just a few minutes
NO TOOLS REQUIRED: Installation is hand-tight
FLEXIBLE SYSTEM: Works with PE pipe systems. Matching clamp connectors are included
COMPACT DESIGN: Professionally pre-assembled, space-saving due to underfloor mounting
COMPATIBLE: The 25mm system is compatible with Gardena 25mm pipelines.

The valve box is intended for outdoor use only.

The outlets are oriented to the front, the inlet is on the left side. In order to use the valve box mirror-inverted, only the clamp connector for the water connection must be mounted on the other front side (without tools and without additional parts).

Further valve boxes can be attached via the end cap: simply replace the end cap with the connector ZG-10-TVSMF-2F .

Installing your valve manifold in a few easy steps: simple and professional

The greatest strength of the box is its user-friendliness. The valve box is designed to keep everything neat and tidy - making installation quick and easy.

The valves are fully assembled; once everything is hand-tightened, you are ready to go.
The packaging is also the installation manual for your valve box, with many useful tips & tricks for installation.
You can also find more information in our installation brochure.

The valve box allows you to divide the irrigation into several circuits in order to adapt the available amount of water to your actual consumption.

Installation dimensions:
- approx. top 30 x 43cm, bottom 46 x 59cm, height 31cm
- Connections protrude approx. 10cm.

Technical data
Our Plug&Rain Expert valve box is composed of high-quality components from leading irrigation manufacturers:
- 3 solenoid valves PGV-101 Professional Grade Valve by HUNTER 9V DC (latching solenoid) with flow control for optimal regulation of the water supply.
- Pipe elements with 1" external thread (Ø 33.25mm) swivvel connections made of professional quality with endstanding O-rings
- Compressed air connection for convenient winter drainage of the entire irrigation system
- Inlet with high-quality UNIDELTA clamp connector for 25mm PE pipe
- 3 x outlet with high-quality UNIDELTA clamp connector for 25mm PE pipe
- particularly stable Carson underfloor shaft
This valve box is suitable for the NODE BT (ZZ-HTNODEBT400) and NODE (ZZ-HTNODE-400) controls.
This controller can be placed in the valve shaft.

Planning your garden irrigation with the DVS Sprinkler Planner

With our free DVS Irrigation Planner, you can plan your garden irrigation online in just a few steps; the appropriate valve box for your project is automatically suggested there - depending on the number of irrigation circuits.