Water connection socket 32 mm Plug&Rain Eco

With the Plug&Rain® Eco tap connection box for 32 mm (1 inch) PE pipe, a simple plug-on connection is created from the tap to the underground irrigation system via a hose. The large internal cross-sections of the components used keep pressure losses low, even at the high flow rates that occur in irrigation systems.

The Plug&Rain® tap junction box in the Eco version consists of the following components:

We recommend the system for 32 mm (1 inch) for systems with a water consumption of over 1.8 m³ / h and for long pipe runs of over 50 meters per watering line. These should then also be completely lined with 32 mm PE pipe.

P PE pipe with a pressure resistance of 10 bar at 20°C (PN10) or more should always be used for the parts of the irrigation system that are permanently under supply pressure.

The set consists of individual parts.
Only the connection between the water socket and the clamp connector needs to be sealed with Teflon tape. To do this, the Teflon tape is wound onto the external thread to be sealed according to the screw-in direction. If the correct number of windings has been applied, the clamp connector can now be screwed onto the water socket against resistance but without tools. The clamp connectors are connected to the PE pipe according to the instructions .

Dimensions:

Can approx. H 20 cm, Ø 7cm

The Plug&Rain® Eco tap junction box is only intended for outdoor use.