Mounting unit Plug&Rain tap connection 25MM EXPERT - SIMPLE.HIGH-QUALITY.PROFESSIONAL.
Plug&Rain® tap connection 25mm Expert

Connection
Quality
92,35 €
incl. 19% VAT , Free shipping
Available immediately
Deliverydate: 03.04.2024 - 08.04.2024
Description

Water tap connection 25mm Plug&Rain Expert

The Plug&Rain® water tap connection Expert for 25mm (¾" inch) PE pipe creates a visually appealing and high-quality connection from the water tap to the underground PE pipework. The large internal cross-sections of the components used keep pressure losses low, even at high flow rates such as occur in irrigation systems. The high quality of the components guarantees a long life expectancy.

A tap connection for 25mm PE pipes is correctly dimensioned if the water consumption does not exceed 1.8m³/h and the pipe lengths are less than 50 metres per irrigation circuit. If the system is designed for an even higher flow rate or has unusually long pipes, we recommend that the entire system and also the tap connection be designed in the 32mm (1" inch) variant.

The Plug&Rain® tap connection 25mm Expert includes a brass T-piece which, with its ¾" (24.5mm) internal thread, can be connected to a typical ¾" garden tap (26mm external thread). The enclosed ¾" tap is connected to the side outlet. This still allows water to be easily drawn from the water supply without having to remove parts of the tap connection. A hose connection can also be easily attached here.

The flexible stainless steel pipe is connected to the external thread of the brass T-piece. This is led down to the floor, where the transition to the 25mm PE pipe is made with a high-quality clamp connector. We recommend PE pipes with pressure rating PN10 (10 bar pressure resistance at 20°C) or more for the area permanently under supply pressure upstream of the Valve distribution.


Included in the set:
- ¾" T-piece (brass)
- ¾" water tap with 1" (33.25mm ET) outlet
- 1 metre of flexible stainless steel pipe with ¾" l connections.
- High quality 25mm compression fitting for PE pipe.

The parts seal at the threaded fittings by means of surface seals. The connections are only hand-tightened or tightened to the point where there is no leakage. Avoid over-tightening, as this can damage the seal.
The clamp connector is connected to the PE pipe according to the instructions.


The Plug&Rain® water tap connection Expert is intended for outdoor use only.


Reviews

Write the first review for this item and help others make a purchase decision!: