Cistern pump set Plug&Rain for irrigation systems PREMIUM - THE BEST FOR YOUR GARDEN.

Cistern pump set for irrigation systems with Esybox Diver X submersible pump from DAB - Plug&Rain® PREMIUM

with floating extraction and connection for 25 mm as well as 32 mm PE pipes

You want to run your irrigation with rainwater? That's a good decision! Because rainwater is cheap and has the optimal characteristics to support healthy plant growth in your garden.

Often, the performance of cistern pumps is only designed for manual water withdrawal at the garden faucet. If such a small pump is to operate an entire irrigation system, the system must be designed with many zones, which causes significant additional costs.

We therefore recommend our powerful cistern pump sets. These contain a pump with an optimal performance for irrigation systems of at least 1.8 m³/h at a dynamic pressure of 3.5 bar.
With this output, you can perfectly dimension the irrigation circuits and, for example, irrigate a lawn area of approx. 180 m² or around 70 m² of flower beds in one irrigation circuit with the MP Rotator.

The particularly high-quality Plug&Rain® Premium cistern pump set contains the multistage submersible pressure pump Esybox Diver X from DAB, which is characterized by extremely quiet operation. It is designed as a monobloc pump, the hydraulic part is located under the motor. The motor is cooled by the pumped water. Stainless steel (AISI 303) was used for the outer casing, the stator casing, the upper head piece and extension of the rotor shaft. A built-in thermal and current circuit breaker protects the pump from overload.

Cistern pump set Plug&Rain® PREMIUM Scope of delivery:

• DAB Esybox Diver incl. DConnect Box 2
• Suction system with floating water intake and stainless steel strainer filter
• Connection parts for 25 mm and 32 mm PE pipes
• 5 m Rehau quality hose with all necessary connection parts in high quality metal design
• Rope for lowering / removing the pump and snap hooks

Dimensions

• Width: 740 mm
• Height: 230 mm
• Depth: 300 mm

Specifications DAB Esybox Diver X

• Suction: 1" internal thread
• Pump opening: 1 1/4" internal thread
• Voltage: 230 V 50 Hz
• Nominal power: 0,6 kW
• Cable length: 15 m
• Maximum head: 55 m
• Maximum immersion depth: 12 m
• Minimum water level: 110 mm
• Maximum water temperature: 50 °C
• Maximum start-up pressure: 2.4 bar
• Maximum starts/hour: 60/h
• Suitable for continuous operation
• IP68 certified
• Floating discharge included in delivery
• Pump diameter: 185 mm
• Via App and DConnect Box 2 control and management possible.
• Possible installation type:?Horizontal
  • Vertical
  • Submerged
  • Semi-submerged
  • Dry (accessories required)

More information about the Esybox Diver X can be found here.