Quick Joints Angle 16 x 16 mm

Quick connector angle 16 x 16 mm

The quick connector is the fastest way to securely connect 16 mm pipes with a wall thickness of 0.8-1.5 mm. The Quick Joints series connectors are made of high-strength polypropylene and are suitable for use both above and below ground. They are particularly suitable for drip pipes and PE pipes in low-pressure applications and provide a watertight connection up to 6 bar.

Installation instructions

1. Unscrew the nut from the connector.
2. Slide the nut onto the hose with the narrow end facing forward.
3. Insert the connector's nozzle into the hose.
4. Tighten the nut firmly onto the connector by hand.

Dimensions

• Length: 65 mm
• Width: 65 mm
• Height: 30 mm

Specifications

• Pipe compatibility: 16 mm with 0.8-1.5 mm wall thickness
• Material: Polypropylene
• Maximum pressure: 6 bar
• Suitable for: Drip pipes, PE
• Installation type: Above and below ground
• Design: Angle 16 x 16 mm