Plug&Rain Drip Irrigation Assembly 35m² 25MM EXPERT - SIMPLE.HIGH-QUALITY.PROFESSIONAL.

High-Quality Drip Pipe Assembly Unit for ca. 35m² bed or 50m hedge - in professional Plug&Rain® Expert Quality

Version for 25mm PE pipe

Do your flower beds, shrubs or hedges suffer from heat and drought in the summer months? Would you like a particularly water-efficient irrigation system that can also supply water to narrow areas in your garden or to plants on difficult terrain and steep slopes? In this case we recommend our drip pipe through which the water is slowly and directly released into the root zone. In this way, evaporation losses are minimised and the plants are watered with pinpoint accuracy.

To irrigate a bed, drip pipes are laid evenly on the ground at a distance of approx. 35cm, the individual strands are connected with tees and secured with ground hooks. For hedges, a drip pipe is laid on both sides and the two strands are also connected to each other. Stand-alone shrubs can be enclosed with a ring of drip pipe. A fitting with a matching pressure gauge is used to supply the drip pipe. The fitting is connected to your 25mm supply line with a pressure fitting.

The Plug&Rain^® Expert Drip Pipe Assembly Unit comes with all the parts necessary to irrigate an area of around 35m² with high-quality drip pipe in above-ground installation. The connection set with shut-off valve is intended for the terminal fitting to your 25mm (¾") supply line.

The Plug&Rain^® Expert Assembly Unit comes with the connection unit pre-mounted and ready for installation. If required, additional connection units can be ordered separately (ZS-TR25EXP-01-VM).

The enclosed Expert drip pipe is suitable for above-ground as well as underground use. If underground installation is intended, then the additional add-on set (ZS-TREXP-02-VM or ZS-TRPREM-02-VM) for underground installation is to be used.

Included in the set:
- 100m high-quality Rain Bird drip pipe with pressure compensation, suitable for above-ground as well as underground installation
- Connection Set with high-quality pressure fitting for 25mm (¾") PE pipe, swing joint, pressure gauge, shut-off valve and 17mm Lock Type drip pipe fitting
- high-quality brown ground hooks (100 pieces)
- XFF tees, 17mm (10 pieces)
- XFF straight fittings, 17 mm (5 pieces)
- XFF 90° elbows, 17mm (10 pieces)
- Lock Type end fittings, 17mm (10 pieces)
- XFF-Assembly tool for efficient and easy Installation

Technical Data drip pipe:
- external diameter 16.1mm
- wall thickness 1.2mm
- emitter spacing 33cm and 2.3 litre/h per emitter
- operating pressure 0.59 to 4.14bar at a water temperature up to 38°C.
- recommended filtration 125µm