90° elbow 1/2" male x 1/2" female. Plastic

90° elbow 1/2" male x 1/2" female PN10 - Irritec

If you want to turn the cable routing by 90°, the thread size should not change and there is a male thread and a female thread, then you are at the right address with this angle connector. For this purpose, these angles from the company Irritec are ideal.

With this resilient and cleanly processed 90° angle, the connection of the selected parts works without problems. Due to the robust polypropylene plastic material, the angle can be loaded up to a pressure of up to 10 bar without taking damage. This angle has two 1/2" connections, once as external thread and once as internal thread. To properly seal the connection, it is recommended to use Teflon tape, Teflon thread or even a liquid gasket if the parts to be connected do not already have a suitable gasket.

Dimensions

-Width: 61 mm
-Height: 43 mm
-depth: 31 mm
-Weight: 17 g

Specifications

-Connections: 1 x 1/2" female thread; 1 x 1/2" male thread
-Maximum pressure load: 10 bar