Filter unit with main valve for wall mounting 25MM PREMIUM - THE BEST FOR YOUR GARDEN

Wall Mounting Filter Unit with Brass Main Valve, 25 mm (3/4") Plug&Rain® Premium

Dirt particles such as grains of sand, rust from corroded supply pipes or lime sediments are very often found in tap water. The dirt contamination load is even higher for well and cistern water. These pollutants can disrupt the function of your irrigation system and thus cause damage to your garden, especially during an extended period of unattended operation. With a Plug&Rain® filter unit you can significantly increase the reliability, operational safety and life expectancy of your irrigation System.

With the premium wall mounting filter unit in our Plug&Rain® System you get a filter unit of uncompromisingly high quality with an extended range of functions such as a manual shut-off valve, an electrically operated brass main valve and an inlet for compressed air.

The large-volume filter unit with a mesh size of 130 microns reliably protects your irrigation system from contamination and keeps the pressure loss extremely low even at high flow rates.
If the filter is clogged - indicated by the decreasing operating pressure of the irrigation system - you can simply rinse it after opening the filter cap.

The electric Hunter IBV main valve is opened via your Plug&Rain® control system and the entire installation is automatically depressurised outside watering times. This significantly increases operational safety.
Before winter, you can empty your entire irrigation system conveniently and professionally via the inlet for compressed air.

The Plug&Rain® Premium filter unit is shipped pre-assembled in two parts. The two parts can be joined easily and quickly with the enclosed brass screw fitting.

Included in the set:

• Rain Bird plastic basket filter unit with stainless steel filter body 130 micron, up to 20 m³/h
• 1" (ø 33.25 mm) brass ball valve as manual shut-off valve
• Hunter IBV solenoid valve with solid brass valve Body
• Compressed air drain with valve and compressed air coupling
• High-quality pressure fitting for 25 mm (¾") PE pipe
• Classy "1" (ø 33.25 mm) brass screw Fittings
• Electric connection set with watertight pressure Fittings
• Attachment kit for wall mounting

Technical Data:

• Installation dimensions ca.: width: 97 cm, hight: 28 cm, depth: 16 cm
• Pressure resistance up to 8 bar at 20°C

The Plug&Rain® filter units are intended for outdoor use only.