DVS Beregnung

DVS Expert Drip Line Pro-Line 16 mm surface and subsurface, pressure compensated SDI 33cm 2.1 l/h 50 m [52 rolls]

[52 rolls] Pressure-compensated drip line with mechanical anti-siphon protection for surface and subsurface installation — on shutdown, a spring-loaded membrane seals the emitter outlet and prevents soil particles from being drawn in. With 137.78 mm² filtration area and CV < 3 % for permanently uniform irrigation, maintenance-free and independent of soil pH or water chemistry.

Qualität
Verpackungseinheit
2.891,96 €
1,11 € per 1 m
incl. 19% VAT , Free shipping
Recommended retail price: 4.455,36 €
Available immediately
Deliverydate: 23.07.2026 - 31.07.2026 (DE - int. shipments may differ)
Another 100,00 € and your order will be eligible for free shipping with DHL shipping to Germany.
DVS Expert Drip Line Pro-Line 16 mm surface and...
DVS Expert Drip Line Pro-Line 16 mm surface and subsurface, pressure compensated SDI 33cm 2.1 l/h 50 m [52 rolls]
2.891,96 € *

1 Pallet: 50 Metre DVS Pro-Line Drip Line EXPERT | 16 mm | Pressure Compensated | Anti-Siphon | 33 cm | 2.1 l/h [52 Rolls]

The DVS Drip Line EXPERT is suitable for both surface and subsurface installation thanks to the integrated anti-siphon mechanism of the DVS DL-AS emitter. When the system shuts down, a spring-loaded membrane barrier mechanically seals the emitter outlet — soil particles, sand or silt cannot be drawn in. Additional air release valves at the highest point of the system are therefore unnecessary. The pressure-compensating DVS DL-AS emitters deliver uniform irrigation over the entire length of the drip line — including on slopes and long runs.

The DVS Drip Line EXPERT is the next generation of classic subsurface drip irrigation: instead of relying on chemical additives or metal elements, a purely mechanical locking mechanism permanently protects the emitter from contamination — independent of soil pH, water chemistry or season. With an effective filtration area of 137.78 mm² — the largest in the class of compact anti-siphon flat emitters — and a particularly thick silicone diaphragm, the DVS Drip Line EXPERT is designed for decades of low-maintenance operation.

Features of the DVS Drip Line EXPERT for irrigating beds, hedges and lawn areas:

Install. Forget. Done.
The integrated anti-siphon mechanism of the DVS DL-AS emitter provides purely mechanical protection against the ingress of soil particles — no chemical additives, no copper elements, no maintenance required. The flat emitter design reduces pressure loss in the line, enables longer runs and significantly simplifies installation.

Reliable.
The pressure-compensating DVS DL-AS emitters ensure uniform flow over the entire line length — with a coefficient of variation (CV) of less than 3 % across the operating range of 0.6 to 4.0 bar. Whether the first or last plant on the run: each receives exactly the same amount of water. The effective filtration area of 137.78 mm² at 580 micron slot width offers maximum tolerance towards suspended particles and noticeably extends maintenance intervals at the main filter.

Durable.
The brown UV-stabilised PE pipe blends discreetly into planting areas and bark mulch and is designed for permanent surface as well as subsurface installation. The particularly thick chemical-resistant silicone diaphragm of the DVS DL-AS emitter maintains its regulation accuracy even under years of fertiliser exposure — for a system designed for longevity from the outset.

Technical Data DVS Drip Line EXPERT

  • Length: 50 m per roll (1 pallet = 52 rolls)
  • Emitter: DVS DL-AS (PC + anti-siphon flat emitter)
  • Flow rate per emitter: 2.1 l/h
  • PC operating range: 0.6 to 4.0 bar (6 to 40 m WC)
  • Coefficient of variation CV: < 3 %
  • Anti-siphon: Yes — mechanical, spring-loaded membrane barrier
  • Effective filtration area: 137.78 mm²
  • Inlet slot width: 580 micron
  • Recommended filtration: 120 mesh / 130 micron
  • Outer diameter: 16 mm
  • Wall thickness: 1.2 mm (48 mil)
  • Emitter spacing: 33 cm
  • Colour: Brown
  • Standard: ISO 9261
Information on product safety
Manufacturer information: Name: DVS Beregnung GmbH
Street name: Dahlienweg 13 - 15
Postal code, City: 72072 , Tübingen
Country: Deutschland
State: Baden-Württemberg
E-Mail: [email protected]
Homepage: https://dvs-beregnung.de

  • Quality level: EXPERT
  • Pipe system: 17 mm
  • : 4,0 Bar
  • Length: 50 m
  • Shipping weight: 130,00 kg
  • Item weight: 130,00 kg
  • Content: 2.600,00 m

How do you like DVS Expert Drip Line Pro-Line 16 mm surface and subsurface, pressure compensated SDI...?

Write the first review for this item and help others make a purchase decision!: