Unidelta 90° elbow, 25 mm × 1/2" AG PN 16, clamp connector for PE pipe

90° angle with high-quality clamp connector for 25 mm PE pipe and a ½" external thread - UNIDELTA

UNIDELTA clamp connectors create a solid connection to the PE pipes used. With a wide range of designs available, most requirements such as bends, branches, transitions to threads, etc. can be easily met.

This model is a 90° angle with a clamp connector connection and an external thread connection. Numerous combinations can be realized using this versatile type of connector. For example, these connectors can be used to connect a valve distribution system to the continuous pressure line.

Information on installing UNIDELTA clamp connectors can be found here.

Material

• Body and cap nut made of food-grade PP: UV and oxidation resistant; suitable for outdoor use
• Clamping ring made of PDM acetal resin: Allows high tensile loads without compromising the tightness of the connection
• Compression ring made of PP: compensates for ovality of the pipe
• Sealing ring made of black nitrile rubber NBR

Dimensions

• Width: 99 mm
• Height: 79 mm
• Depth: 55 mm
• Weight: 80 g

Specifications

• Design: 90° angle
• Connections: 1 x 25 mm clamp connector for PE pipe; 1 x 1/2" external thread
• Maximum pressure load: 16 bar