Angle 90° with AG ø 20 x 1/2" Unidelta 77850-2005

90° angle with high-quality clamp connector for ø 20 mm PE pipe and a ½" external thread - UNIDELTA

UNIDELTA brand compression fittings create a solid connection to the PE pipes used. With the wide range of designs available, most requirements, such as bends, branches, transitions to threads, etc., can be easily met.

This model is a 90° angle with a clamp connector connection and an external thread connection. Numerous combinations can be realized using this versatile connector type. For example, these connectors can be used to connect a valve manifold to the constant pressure line.

You can find information on how to install the UNIDELTA clamp connectors at here.

Material

• Body and cap nut made of food-grade PP: UV and oxidation resistant; can be used outdoors
• Clamping ring made of acetal resin PDM: withstands high tensile loads without reducing the tightness of the connection
• Compression ring made of PP: compensates for the oval tendency of the pipe
• Sealing ring made of black nitrile rubber NBR

Dimensions

• Width: 86 mm
• Height: 63 mm
• Depth: 46 mm
• Weight: 50 g

Specifications

• Design: 90° angle
• Connections: 1 x 20 mm clamp connector for PE pipe; 1 x 1/2” male thread
• Maximum pressure: 16 bar