4 valves - Valve Box Hunter PGV, 25mm (3/4") Plug&Rain Eco

Pre-assembled standard underfloor valve box for 4 zones with Hunter solenoid valves - in low-cost Plug&Rain Eco quality.

Designed for 25mm PE piping

The heart of your irrigation system is our Plug&Rain® valve box, which controls the water distribution in your garden. The sturdy design and high-quality components from leading irrigation manufacturers ensure that your garden irrigation system will work reliably for many years.

Pre-assembled and tidy - just connect PE pipes and cables to the valve box

The Plug&Rain® valve box comes pre-assembled in a sturdy shipping carton. You only need to screw on the clamp connectors and connect the control cable (which must be purchased separately) to the solenoid valves.
Waterproof electrical connectors are not included with ECO equipment, please order them separately.

A control unit is required to use the box. This is programmed to water the individual zones in the order you desire. We recommend using our DVS Plug&Rain® weatherproof control cables to connect the valves to your controller. For the number of required wires you calculate one common wire (ground) plus one control wire per valve. A 4 valve box therefore needs 5 wires for the control.

The advantages of your Plug&Rain® valve box from DVS Beregnung

VALVE DISTRIBUTION: Controls the flow of water to the irrigation circuits
FAST INSTALLATION: Easy installation in just a few minutes
NO TOOLS REQUIRED: Installation is hand-tight
FLEXIBLE SYSTEM: Works with PE pipe systems. Suitable clamp connectors are included
COMPACT DESIGN: Professionally pre-assembled, space-saving due to underfloor installation
COMPATIBLE: The 25mm system is compatible with Gardena 25mm pipelines

The valve box is designed for outdoor use only.

The outlets are oriented to the front, the inlet is on the left side. To use the valve box mirror-inverted, only the clamp connector for the water connection has to be mounted on the other front side (without tools and without additional parts).

Additional valve boxes can be added using the end cap: simply replace the end cap with the connector ZG-10-TVSMF-2F .

Installing your valve manifold in a few easy steps: simple and professional

The greatest strength of the box is its user-friendliness. The valve box is designed to keep everything neat and tidy - making installation quick and easy to implement.

The valves are fully assembled; once everything is hand-tightened, you're ready to go.
The packaging is also the installation manual for your valve box, with many useful tips & tricks for installation.
You can also find more information in our installation brochure.

The valve box allows you to divide the irrigation into several circuits to adjust the available amount of water to your actual consumption.

Installation dimensions:
- approx. top 27 x 40cm, bottom 36,5 x 50,5cm, height 31cm
- Connections protruding approx. 10cm

Technical data:
Equipped is our Plug&Rain Eco valve box with inexpensive components of leading irrigation manufacturers:
- 4 solenoid valves PGV-100, the entry-level model in professional quality from Hunter (24 V AC)
- Pipe elements with 1" external thread (Ø 33.25 mm) swivvel connections made of professional quality with endstanding O-rings
- Inlet with clamp connector for Ø 25 mm PE pipe
- 4 x outlet with clamp connector for Ø 25 mm PE pipe
- Connection for draining the irrigation system by means of compressed air

Planning your garden irrigation with the DVS Sprinkler Planner

With our free DVS irrigation planner you can plan your garden irrigation online in a few steps; there the suitable valve box for your project is automatically suggested - depending on the number of irrigation circuits.