2 valve manifold with Hunter PGV, 25 mm (3/4") Plug&Rain Eco

Standard wall mounted valve manifold with low cost Hunter solenoid valves for 2 Zones - with cost-effective Plug&Rain Eco quality.

- Suitable for 25 mm PE Pipe Systems

Valve manifolds are the heart of your irrigation system. This is where the irrigation water is distributed to the various sections of your irrigation system according to the signals from your irrigation controller.

Our Plug&Rain Eco wall mounted manifolds are composed of inexpensive components from leading irrigation manufacturers:

- 2 PGV-100 Solenoid valves, the entry-level professional-quality model from Hunter (24 V AC)
- professional 1-inch swivvel fittings with end-standing O-rings
- Inlet with compression fitting for Ø 25 mm PE pipe
- 2 x Outlet with compression fitting for Ø 25 mm PE-Pipe

The manifold is supplied in separate parts and can be assembled without tools. A mounting kit is supplied for wall installation.


To connect the valves to the controller, we recommend waterproof connectors (ZZ-OR57002, ZZ-BZBVS-1) and weatherproof control cables (e.g. ZZ-OR57092 or ZZ-OR57094). These components are available separately from the DVS-Beregnung shop. For the number of necessary strands, calculate one common strand (ground) plus one control strand per valve.
This manifold therefore requires 3 strands for control.


Our expansion set (ZS-VV01ERW25ECO-ET) can be used for subsequent expansion of the valve manifold.

Installation dimensions approx.: Height 35 cm, Width 29 cm, depth 15 cm.