10 x Tropf-Blumat incl. T-Piece and 20 cm Drip Tube: Central Functional Part of the Blumat Irrigation System
Tropf-Blumat provides an irrigation system which reliably cares for any plants. The mechanism works completely without electronics. Your plants are watered according to their actual water requirements.
The system is not only ideal for the holiday season, but is also ideal for watering your plants throughout the season.
If the soil becomes dry, the watering process starts automatically at the respective clay cone. The Tropf-Blumat functions as self-regulating moisture sensor directly where the action takes place: on the plant. The system is water-saving, the slow water release ensures that no water is wasted and no nutrients are washed out by over-watering. The special clay membrane is a self-regulating system that recognizes when the soil is so dry that irrigation is necessary. The Tropf-Blumat therefore serves as a controller with an integrated humidity sensor and as a valve and dripper at the same time.
No more withered plants - no more over-watering and washing out of nutrients
The individual Blumat drippers are fitted to the 8mm supply hose and connected to a high tank or tap with pressure reduction. When the soil around the Trop-Blumat dries out, a suction is created which opens the valve in the Tropf-Blumat; as much water now flows to the plant and the soil until sufficient moisture closes the valve again.
The adjustment of the water quantity, e.g. with regard to the plant size or the desired moisture level of the soil, is made easy by directly adjusting the regulating screw of the Tropf-Blumat. The possible uses for this system are manifold: from balcony boxes, potted plants (e.g. tomatoes), tub plants (e.g. oleander) on the terrace or in the winter garden, to plants in beds, raised beds or in greenhouses.
Details on Use:
As a rule, one Tropf-Blumat is used for pots up to 25 cm in diameter.
With balcony boxes, four Tropf-Blumat or four drip points per 1 m balcony box or three Tropf-Blumat per 0.8 m balcony box are usually used.
Each individual plant or group of plants or each container is assigned to at least one Tropf-Blumat.
This Trop-Blumat is then adjusted to the individual needs of the plants.
All Tropf-Blumat are connected to the supply tube.
The Tropf-Blumat is fully assembled, with a tee 8-3-8 mm for connecting to the 8mm supply tube as well as a 20 cm drip tube. The Tropf-Blumat must be soaked in water for one hour and completely filled with water, then the clay cone is pushed into the well watered soil at a distance of approx. 20 - 25 cm, and connected to the supply tube.
Detailed instructions for installing the Tropf-Blumat system can be found here.
|Shipping weight:||0,40 Kg|
|Product weight:||0,40 Kg|